Question about Cars & Trucks

Open Question

How to change battery on my key fob proton savvy

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 79851 Answers

SOURCE: key fob will not undo

If you don't have one that works for the vehicle now, you'll have to take it to your local dealer to have it programmed to the vehicle. Some will charge for this, some will do it at no charge.

If you do have a remote that is programmed and working for the vehicle, then the following steps will allow you to program another remote:

1. Enter vehicle and close all doors.

2. Put seatbelt on (or clip it into the buckle) to shut the warning buzzer off.

3. Put key in ignition, turn to run position but don't start it.

4. Press and hold the unlock button on the working key fob and hold for 4 seconds, then also press the panic button.

5. Release both buttons and you should hear a single chime to indicate it is in program mode. You have 30 seconds after the chime to program any additional remotes you want to program.

6. Press and release both the unlock and lock buttons simultaneously on the remote you are programming. You should hear another single chime.

7. Within 4 seconds after hearing the chime, press either lock or unlock button on remote that you are programming.

Posted on Oct 16, 2008

Ad
  • 1 Answer

SOURCE: renault megane key fob wont work

I had the same problem with mine

your key fob is now out of sync with the ECU to sync them just follow this link (renault will charge up to £180 for new key and to sync it)

http://renaulthelp.110mb.com/ImmBypass.html

Posted on Jan 09, 2009

emissionwiz
  • 79851 Answers

SOURCE: key fob not working after battery change ford focus 2006

Try reprogramming it.

1. Turn the ignition from OFF to RUN 4 times within 6 seconds.
2. Turn the ignition OFF. The system will chime to confirm programming mode.
3. Within 20 seconds, press any button on first keyless remote.
The system will chime once to confirm programming.

4. Within 20 seconds, press any button on second keyless remote.
System will chime once to confirm programming.

5. Turn ignition to RUN to exit programming mode.

Posted on May 28, 2009

polarcycle
  • 1392 Answers

SOURCE: reprogram 2005 Dodge Durango key fob

Go to the dealer. It is the only way, they have to use a computer. Changing the battery doesn't make it lose it's program though. You most likely broke the battery hold down. This is the most common thing I see at my shop. If the key still starts the vehicle, you now have a bad key fob. If not, you may be able to get it reprogrammed.

Posted on Aug 05, 2009

  • 1 Answer

SOURCE: Key fob won't unlock or lock car VW Golf 2000

my mum had a similar problem and it turn out the code the key transmits to the engine had gone wrong she took it to a vw dealer and they reprogrammed the key. it works fine now and is a common problem. hope that helps

Posted on Sep 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Proton savvy 1.2 runs for a while then stalls


hi,
savvy engine is same with renault engine. there's a flywheel sensor/engine speed sensor between engine and gearbox. change the engine speed sensor.
The engine speed sensor is control the ignition timing, if the sensor can't read the 0' angle the engine won't fire up.

Jul 10, 2014 | 2009 Proton Savvy 1.2

1 Answer

Proton savvy problem


I do not know about them at all - none of my customers have one - but an easy check you can try is try it in neutral - could be the safety switch, if not it may need a starter,or could be a security system issue - sorry I never experienced that vehicle to be of more help

Apr 20, 2014 | 2009 Proton Savvy 1.2

1 Answer

How do i reset my proton savvy key fob as it doesnt lock or unlock doors anymore


these fobs are of poor quality have you tried replacing the battery?

Jan 28, 2013 | Cars & Trucks

1 Answer

How to change side lights on a proton savvy


It is held by a spring with a hook that anchors to the inside of the side panel.

Jan 08, 2013 | 2009 Proton Savvy 1.2

1 Answer

I have a Proton Savvy 2009 model milliage still very low but sometimes it does not want to start at first i thought it may be the battery but the battery is fine, when you turn the key all the lights light...


Hi. Thanks for your question. For proton savvy milliage issue you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!

Jun 05, 2017 | 2009 Proton Savvy 1.2

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14309 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...