Question about Dodge Cars & Trucks

Open Question

Code po 1193 - Dodge Cars & Trucks

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
ghost4548
  • 776 Answers

SOURCE: Emission system codes

P0421 - Warm Up Catalyst Efficiency Below Threshold (Bank 1)
P0171 - Fuel System Too Lean - (Bank 1)
P0446 - Canister Close Valve Malfunction
P1191/P1193 - Limp Home Valve - Low RPM
Before replacing the catalytic converter (bank 1 next to the firewall, Bank 2 is near the radiator), you'll want to verify it is bad (most likely is it sinse you also have a 'lean' code for Bank 1 - probably clogged). This can also cause misfires and engine stumble (low RPM) that's probably where the 1191/1193 occurred. The final DTC, P0446 - Canister Close Valve Malfunction, could be the valve itself, or the wiring between it and the PCM. Check the connector & pins for any damage/corrosion.
daf574f.jpg
Hope this helps

Posted on Jun 14, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fault codes PO 193 FRP -- PO 101 MAF -- PO 380 -- PO a 09dc/dc -- PO 238 TURBO/ super charger-- PO 118 ECT -- PO 283 fuel temp sensor -- U 2023 brake sensor


101,380 and 118. These together is a no start. Take it to a garage. Just a guess, but I would be looking into the wiring. You waited to long to have a problem fixed. One bad part over time will lead to many codes. The PCM is trying to adjust to make the engine run right. Throwing other sensor out of range. Out of range pops a code.

Aug 06, 2016 | Ford Cars & Trucks

1 Answer

P1193


Code 1193 is for the intake air temp sensor telling the computer the air temp is very high when it is not. The temp sensor and circuit would need to be checked with a scanner to verify the problem.

Mar 04, 2014 | 2003 Dodge Caravan

1 Answer

2000 Honda Accord po-7*** errors


You can't fix these types of complex electronic engine control problems without special equipment.

Jun 12, 2013 | Honda Accord Cars & Trucks

1 Answer

Code number for o2 sensor voltage low


Forget to write it down?

Generic or Manufacturer?

There are 41 Generic O2 Codes

PO 131--bank 1 sensor 1
PO 137--bank1 sensor 2
PO 143--bank1 sensor 3
PO 151--bank2 sensor 1
PO 157--bank1 sensor2
PO 163--bank2 sensor 3

Nov 23, 2012 | 2009 Toyota RAV4

1 Answer

Po316, po 300, po301, po305 2004 ford freestar


These codes are making me lean towards the ignition coil pack.My stepson's 2001 Sable 3.0 v6 had one cylinder misfiring(5-code P0305),which shares a coil with cylinder 1(code P0301).I diagnosed it by trading wire 1 and 5 at the coil,and the code changed to P0301.You have codes for the two cylinders on the same coil,so this is most likely it.(these codes would also trigger P0300(Multiple Misfires Detected) and P0316(Misfire Detected First 1000 Revs)).

Oct 14, 2012 | 2004 Ford Freestar

2 Answers

Error codes po 134 po 153 po 154 po 155 po 171 po 174


PO 134 = 02 SENSOR CIRCUIT NO ACTIVITY DETECTED (BANK 1 SENSOR1)
PO 153 =02 SENSOR CIRCUIT SLOW RESPONSE (BANK 2 SENSOR 1)
PO 154 =02 SENSOR CIRCUIT NO ACTIVITY DETECTED (BANK 2 SENSOR 1)
PO 155= 02 SENSOR HEATER CIRCUIT MALFUNCTION (BANK 2 SENSOR 1)
PO 171= SYSTEM TOO LEAN (BANK 1)
PO 174= SYSTEM TOO LEAN (BANK 2)
I WOULD SAY YOU HAVE FAULTY OXYGEN SENSORS CAUSING THE ENGINE TO RUN TOO LEAN REPLACE THEM AND YOU SHOULD BE BACK IN BUISNESS

Feb 23, 2011 | 2004 Suzuki Grand Vitara

1 Answer

MY CAR WAS PUT ON A MACHINE AND IT CAME BAC THE FOLLOWING CODES: PO 301, PO304, PO335, AND PO 750. I DONT KNOW WHAT TO DO MY MECHANIC SAYS THAT THE SHIFT SOLENOID IS LOCATED IN MY TRANSMISSION AND HE...


hi p -codes are as follows po 301 cylinder 1 missfire detected
po 304 cylinder 4 missfire detected
po 335 crankshaft position sensor A circuit malfunctio
po 750 shift solenoid A malfunction

Feb 23, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

Emission system codes


P0421 - Warm Up Catalyst Efficiency Below Threshold (Bank 1)
P0171 - Fuel System Too Lean - (Bank 1)
P0446 - Canister Close Valve Malfunction
P1191/P1193 - Limp Home Valve - Low RPM
Before replacing the catalytic converter (bank 1 next to the firewall, Bank 2 is near the radiator), you'll want to verify it is bad (most likely is it sinse you also have a 'lean' code for Bank 1 - probably clogged). This can also cause misfires and engine stumble (low RPM) that's probably where the 1191/1193 occurred. The final DTC, P0446 - Canister Close Valve Malfunction, could be the valve itself, or the wiring between it and the PCM. Check the connector & pins for any damage/corrosion.
daf574f.jpg
Hope this helps

Mar 30, 2009 | 2001 Hyundai XG300

1 Answer

2000 dodge neon suddenly shut off


bit to do to replace the oil pump
yours is a second gen
its repair manual would help

Second generation (1999-2005)
have 2003 neon and was wondering where the oil pump is located

Apr 30, 2017 | 2002 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...