Question about Cars & Trucks

Open Question

05 tacoma 4.0 timing chain marks - Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 32 Answers

SOURCE: I need a diagram for the timing chain and marks

this should help you bro

Posted on Apr 02, 2010

Ad
johnjnail
  • 1702 Answers

SOURCE: I need a diagram for

on the chain you will find 3 different coler links these are the timing marks line the links up with the dots on the sprockets.


johnjnail_63.jpg

Posted on Jun 20, 2011

  • 1252 Answers

SOURCE: i need a diagram for the time and markings for a

To much too type, there is a lot of details to this job, the best thing to do is to get a book on this particular vehicle, its about $20.00 at a auto parts store. This will give you all the timing marks, locations and torque specs ect....

Posted on Jun 20, 2011

Mr BrokRench
  • 1623 Answers

SOURCE: Replaced head gasket on 08

35 psi on EVERY cylinder with 0 leak down? Timing, valves, camshaft and head are all tested and passed?...Yup, you need help....Did you perform a wet compression check? Did you check the block deck surface? Why was the gasket replaced on a 08 model? Did it overheat? Squirt a little motor oil in the cylinders, and run another compression check...Give me some more info if you can.

Posted on Sep 18, 2011

SOURCE: I need a diagram to set the time on the timing chains of a 1997 Toyota Tacoma 2.7L, 4 cylinder, 3RZ. It is out of time. I need a diagram on how to time the timing chains. Markings needed to set time.

Please contact me at sj196653@yahoo.com I will send you full pictures and literature on this subject.After you rate my solution i no longer give out my time and resources for a later rating on my solution which they did not even go back and give me a number 1 rating sorry. This is why i do this for my ratings.

Posted on Apr 14, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you adjust valves on a 2006 3.5L V6 Toyota Avalon?


There is a Toyota Technical Service Bulletin issued for this:-
T-SB-0291-08 September 11, 2008 2GR-FE Valve Timing

Procedure Service Category Engine/Hybrid System Section Engine Mechanical Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2005 - 2009 Avalon 2007 - 2009 Camry VDS(s): BK46K 2008 - 2009 Highlander 2006 - 2009 RAV4 Engine(s): 2GR VDS(s): BK31V, BK32V, BK33V, BK34V, ZK31V, ZK32V, ZK33V, ZK34V, ZK35V 2007 - 2009 Sienna Introduction This service bulletin provides information regarding valve timing inspection and service guidelines for vehicles equipped with 2GR-FE engines. © 2008 Toyota Motor Sales, USA Page 1 of 5 T-SB-0291-08 September 11, 2008 Page 2 of 5 2GR-FE Valve Timing Procedure Introduction (Continued) Figure 1. 3 2 1 5 9 8 7 6 4 1 RH Bank Intake Camshaft Timing Gear 2 RH Bank Exhaust Camshaft Timing Gear 3 RH Bank No. 2 Timing Chain 4 Crankshaft 5 Idler Gear 6 Timing Chain 7 LH Bank No. 2 Timing Chain 8 LH Bank Exhaust Camshaft Timing Gear 9 LH Bank Intake Camshaft Timing Gear Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 3 of 5 2GR-FE Valve Timing Procedure Inspection 1. Set the No. 1 cylinder to TDC/compression. A. Set the timing mark to 0 on the timing chain cover by rotating the crankshaft clockwise. B. Verify the timing marks on the camshaft timing gears are in general alignment with the timing marks of the camshaft bearing cap: TIMING MARK IDENTIFICATION CYLINDER BANK INTAKE GEAR MARK EXHAUST GEAR MARK RH Bank (Bank 1) Small Mark Single Line LH Bank (Bank 2) Large Mark Double Line HINT When the engine is correctly timed, the timing marks will NOT perfectly align. Figure 2. Figure 3. RH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 4. RH Bank Intake Camshaft Timing Gear 2 1 1 Bearing Cap Timing Mark 2 Gear Timing Mark © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 4 of 5 2GR-FE Valve Timing Procedure Inspection (Continued) Figure 5. LH Bank Intake Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 6. LH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark HINT If the timing marks appear vastly out of alignment, turn the crankshaft one revolution (360 ) clockwise and note the position of the timing marks. Component Removal Guidelines 1. If engine disassembly is required that involves removing the camshafts or timing gears, set the #1 cylinder to TDC compression, wipe away any oil, and mark the following items in relation to each other prior to disassembly: • Timing gears • Timing chain • Timing chain No. 2 NOTE This relationship MUST be maintained. The intake gear is timed in relation to the crankshaft via the timing chain; the exhaust gear is timed in relation to the intake gear via the No. 2 timing chain. © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 5 of 5 2GR-FE Valve Timing Procedure Component Removal Guidelines (Continued) 2. If NEW camshaft timing gears or the No. 2 timing chain are being installed, the two yellow links on the No. 2 timing chain can be used to ensure correct relationship between the intake timing gear and the exhaust timing gear. Figure 7. 1 1 Yellow Link A. Align the paint mark on the timing chain with the intake gear timing mark (to ensure the intake gear is correctly timed to the crankshaft). Figure 8. RH Bank and LH Bank 3 3 4 3 3 4 5 4 5 4 1 2 1 RH Bank 2 LH Bank 3 Yellow Link 4 Gear Timing Mark 5 Timing Chain Paint Mark B. Align the two yellow links on the No. 2 timing chain to the timing marks on

May 04, 2015 | 2006 Toyota Avalon XLS

1 Answer

Will broken time chain damage 2006 4 cylinder toyota tacoma motor


Oh yes it will. Remove the valve cover and release the valves/cam/s. Do a leak down test. If it holds, you lucked out.

Jan 04, 2015 | 2006 Toyota Tacoma

2 Answers

Timing chain


It appears that you got it right but to be sure the check is on the timing chain there are 3 black links If you have it right then the black links will line up with the marks. If not then re adjust the gear that is not correct.- ensure that you have the ignition timing right as you may be 180 degrees out

Jan 12, 2014 | Saturn Ion Cars & Trucks

1 Answer

I need a diagram to set the time on the timing chains of a 1997 Toyota Tacoma 2.7L, 4 cylinder, 3RZ. It is out of time. I need a diagram on how to time the timing chains. Markings needed to set time....


Please contact me at sj196653@yahoo.com I will send you full pictures and literature on this subject.After you rate my solution i no longer give out my time and resources for a later rating on my solution which they did not even go back and give me a number 1 rating sorry. This is why i do this for my ratings.

Apr 14, 2012 | 1997 Toyota Tacoma

1 Answer

I need a diagram for the time and markings for a 1997 toyota tacoma 2.7L 4 cylinder 3rz


To much too type, there is a lot of details to this job, the best thing to do is to get a book on this particular vehicle, its about $20.00 at a auto parts store. This will give you all the timing marks, locations and torque specs ect....

Jun 19, 2011 | 1997 Toyota Tacoma

3 Answers

Me puedes proporcinar la posicion de la cadena de tiempo para una tacoma 4 cilindros motor 2.7 3RZ


Revice los siguientes diagramas para 2002 Toyota Truck Tacoma 2.7L EFI DOHC 4cyl (click over pic for zoom)...

zjlimited_521.jpg

Fig. Timing chains and related components-2.4L and 2.7L (3RZ-FE/M) engines

zjlimited_522.jpg

Fig. Check that the No.1 cylinder is at TDC and the weights of the No.1 and No.2 balance shafts are at the bottom-2.4L and 2.7L (3RZ-FE/M) engines

zjlimited_523.jpg

Fig. Crankshaft position sensor rotor location-2.4L and 2.7L (3RZ-FE/M) engines

zjlimited_524.jpg

Fig. No.1 timing chain and camshaft timing sprocket identification and alignment-2.4L and 2.7L (3RZ-FE/M) engines


Espero que le sea de ayuda (recuerde valorar esta respuesta).

Jan 20, 2011 | 2002 Toyota Tacoma

1 Answer

Engine crankshaft not rotating 360 degrees


Have you check at the piston not are turning in one of the valve. Are the chain ore cam belt on this? , it could happening at the mark are moving and the timing are not right. First check the timing mark , second check if the not has happening at one of the valve not are damage.You can takke of the timing chain and takke los the cam and try to turn the engine , but first check the timing mark.

Feb 19, 2010 | 2008 Toyota Tacoma

1 Answer

Replacing the timing belt on a 1998 Nissan Quest and need to know cam shaft and crank shaft positions.


go here for expert help on Villager & Quest

http://groups.yahoo.com/group/villagerquest/

e09cf57.gif

Item Part Number Description 1 — 40 Timing Chain/Belt Teeth 2 6256 Camshaft Sprocket , Front 3 — 43 Timing Chain/Belt Teeth 4 6306 Crankshaft Sprocket 5 6268 Timing Chain/Belt 6 6256 Camshaft Sprocket , Rear
Removal
  1. Drain the cooling system. Refer to Section 03-03 for the procedure.
  1. Disconnect the battery ground cable (14301) .
  1. Remove the generator drive belt, water pump and power steering pump drive belt, and the A/C compressor drive belt (if equipped). Refer to Section 03-05 for the removal procedure.
  1. If equipped, remove the three A/C compressor drive belt idler pulley bolts and the A/C compressor drive belt idler pulley.
  1. Remove the upper radiator hose bracket bolt.
  1. Loosen the two upper radiator hose clamps and remove the radiator hose bracket bolt. Remove the upper radiator hose (8260) and the upper radiator hose bracket from the vehicle.
  1. Remove the water bypass hose (8597) from between the thermostat housing and the water hose connection (8592) .
  1. Remove the main wiring harness from the upper engine front cover (6019) .
  1. Remove the eight upper engine front cover bolts and the upper engine front cover .
  1. Raise and support the vehicle.
  1. Remove the RH front wheel and tire assembly.
  1. Remove the four RH outer engine and transmission splash shield bolts and two screws and remove the RH outer engine and transmission splash shield (6775) .
  1. Use Strap Wrench 303-D055 (D85L-6000-A) or equivalent to hold the water pump pulley (8509) while removing the four water pump pulley bolts.
  1. Remove the water pump pulley from the water pump (8501) .
  1. Remove the crankshaft pulley (6312) . Refer to the procedure in this section.
  1. Remove the five lower engine front cover bolts and the lower engine front cover .
  2. Ensure that the timing marks between the crankshaft sprocket (6306) and the oil pump housing line up.
  3. NOTE: The directional arrow is necessary to ensure that the timing chain/belt (6268) can be reinstalled in the same direction.
  4. Loosen the timing chain/belt tensioner nut.
  5. Remove the timing chain/belt .

  6. Installation
    NOTE: Ensure that the timing marks on the camshaft sprockets (6256) and the seal plate are properly aligned. Ensure that the timing marks on the crankshaft sprocket and the oil pump housing are still aligned. NOTE: A new timing chain/belt has three white timing marks that indicate the correct timing positions of the camshafts (6250) and the crankshaft (6303) . These marks will help ensure that the engine (6007) is timed properly. When the engine is properly timed each white timing mark on the timing chain/belt will be aligned with the corresponding camshaft and crankshaft timing mark on the sprocket. Because the white timing marks are not evenly spaced you will need to refer to the following illustration for proper timing chain/belt placement. There should be 40 timing belt teeth between the timing marks of the front and rear camshaft sprockets and 43 teeth between the timing mark on the front camshaft sprocket and the timing mark on the crankshaft sprocket .

    NOTE: Verify that the camshaft timing marks are aligned with the timing marks on the seal plate, and that the crankshaft sprocket timing mark is aligned with the timing mark on the oil pump (6600) .

    Install the timing chain/belt starting at the crankshaft sprocket and moving around to the camshaft sprocket following a counterclockwise path. Do not allow any slack in the timing chain/belt between the timing sprockets. After all of the timing marks are matched up with the timing chain/belt installed, slip the timing chain/belt onto the timing chain/belt tensioner .





Sep 20, 2009 | 1998 Nissan Quest

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...