Question about Cars & Trucks

Open Question

203 m benz b1025 and b1032 trouble codes - Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lost sound on 2005 impala. radio works. seems like amp problem.


Do you have base or up;level system ?

Table 1: Radio Features
Table 2: Cassette Features
Table 3: Compact Disc Features
Table 4: XM Advisory Messages
The radio receives power from the RADIO fuse in the junction block-right I/P. Ground is provided via G201 and G202. The radio is enabled/disabled by class 2 messages from the body control module (BCM). The radio routes audio signals from the digital radio receiver or the vehicle communication interface module (VCIM) to the speakers and/or amplifier when directed by class 2 messages.
The Entertainment System on this vehicle is configured with an AM/FM stereo radio with the radio data system (RDS) and either a cassette player or a CD player or both. CD and cassette. The uplevel system provides the customer with extended range speakers and an audio amplifier. Satellite digital radio (U2K) is available with uplevel systems.
The following list shows the radios available for this vehicle:
• Radio (ULO) - AM/FM Stereo, Cassette with RDS
• Radio (UNO) - AM/FM Stereo, CD and RDS
• Radio (UPO) - AM/FM Stereo, Cassette with CD and RDS .The complexity of the radio systems on these vehicle is mind blowing .

Your best bet take it to a GM dealer , has features you are unawear of .
DTC B1025, B1035, B1045, or B1055
When the radio is powered up, the radio supplies low level audio signals to the speakers. If the vehicle is equipped with an audio amplifier, the amplifier will boost the signal sent to the speakers.
DTC B1025 Audio Output Circuit
Install a scan tool.
Turn ON the ignition, with the engine OFF.
With the scan tool, monitor the DTC Information for DTC B1025.
Does the scan tool indicate that DTC B1025 is current?

Jan 31, 2017 | Cars & Trucks

1 Answer

I have code b1025 on mercedes c240 2001 airbag ignition circuit 1 driver side resistance to high


  • B1025 Component B48 (Front Passenger Seat Occupied and Child Seat Recognition) is faulty

Oct 25, 2016 | 2001 Mercedes-Benz C-Class

1 Answer

Where is the steerin column ground in a mercedes w 203


In the mb w 203, steering angle sensor (sas) is plugged in the multifunction module which is connected to the wiring harness through a snap on connector. The scan tool was constantantly indicating the fault in the sas where as on diassembly I found that one of the connector pin in the module was broken. I changed the module and the problem was fixed.
Hamid Javaid.

Aug 23, 2012 | 2002 Mercedes-Benz S-Class

1 Answer

The radio is locked,when i bought the vehicle there was no manuall or code for the radio.I need too unlock and put the code in the radio. The Model is 203 with code(756)MB Audio 10 Radio/CD/RDS


If the radio is locked up due to inputting the wrong sequence for the radio code it will say "wait" on the display. If this is the case then you need to leave the ignition on along with the radio in order for it to reset. This could take up to 24hrs. You can contact the dealer and give them the vin for the vehicle and ask for a VMI printout for the radio code. Some of the C-class 203 chassis didn't need a radio code.

Sep 30, 2010 | 2001 Mercedes-Benz C-Class

1 Answer

D TC B1025 AND B1045 ENGINE CODES


does your radio works? this dtc sets when the left channel of audio system failed, remove radio and check speaker wires for short or oen, if good change the amplifier or need for repair

Sep 03, 2010 | 2007 GMC Sierra 1500

1 Answer

W 203 C 200K is not cranking? all relays and


Nuetral safety switch checked/repplaced?

Jul 08, 2010 | 1994 Mercedes-Benz C-Class

1 Answer

Mercedes 2001 c class driver seat adjustment not working is it fuse if so which number as wiring seems ok


In 2001 two c class
models 202 and 203
202 check fuse box in boot,spare wheel area
Fuses 12/13 25amp,these both control drivers seat
203 later c class
Check fuse box in boot, fuse 2 30amp,also fuse 38 30amp,located in fuse box end of dash

May 03, 2010 | 2001 Mercedes-Benz C-Class

1 Answer

Radio code for 1995 mercedez benz E320


Usually the Mercedes dealer will give you the code if you are the owner of the vehicle and they might need the VIN# and sometimes the serial# on the radio too.

Apr 10, 2009 | 1999 Mercedes-Benz E-Class

1 Answer

EOBD diagnostic trouble codes


I have a e500 03 i have change the front pads and sensors and rear senor. the dash still says BRAKES VISIT SERVICE CENTER. BACK BRAKES ARE FINE. HELP.

Oct 13, 2008 | 2003 Mercedes-Benz E-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...