Question about Cars & Trucks

Open Question

Cancel alarm on design go world radio kk 939b

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why and how can my radio turn on by itself?


There are many things which can cause this behaviour. Amongst them are:
  • Defect in radio.
  • Automatic power-on by design.
  • Radio has the ability to schedule when it turns on, such as a wake-up alarm.
Knowing what year/make/model of vehicle and radio would help the community troubleshoot your issue more quickly.

Dec 21, 2016 | Cars & Trucks

Tip

How to set & cancel theft deterrent system or how to set & cancel security...


Theft deterrent system (on some models)

Theft deterrent system is designed to deter vehicle theft. The system flashes the turn signal lights and turns on the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn when it detects abnormalities such as follows:

• Any door or hood is forcibly opened.
• The batter terminal is disconnected and then reconnected
• The system control is disconnected and then reconnected.
• Abnormal impact is detected when the impact sensor function is on.

The system flashes the turn signal lights and turns the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn if someone attempts to damage or break into your car.

Setting the system

You can set the system with or without the impact sensor function. For details, see "Canceling the impact sensor" below.

1. Turn the ignition key to "LOCK" and remove it.
2. Have all passengers get out of the vehicle
3. Push the lock (set) switch on the wireless remote control key once. At this time, the turn signal lights flashes once and the security indicator light comes on.

The system is set after 30 seconds. At this time, the security indicator light start flashing slowly.

Once the system is set, you cannot start the engine until you cancel the system.

The system will not be set in the following cases.

• When any of the door is open; security horn sounds for 1 second, close the door and set the system again.
• When the hood is open; close the hood securely.

Canceling the Impact Sensor

The impact sensor can be cancelled to prevent false alarms from being triggered incase of the following conditions:

• When parked in the noisy area
• The vehicle body or glass is subjected to a strong impact from the (such as in highly pressurized car wash).
• When transporting by a car carrier or ferry.

To cancel the impact sensor;

1. Lock the door by pushing the lock (set) switch on the wireless remote control key once, and turn signal light flash once
2. Then push the lock (set) switch twice within 5 seconds. At this time, the turn signal flash 5 times to indicate the impact sensor function is disable.

The impact sensor is deactivated as long as the system remained armed.

Canceling the system

The system will be cancelled by the following two ways:

• Turn the ignition key from "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch

If the turn signal lights flash 3 times, the system has been alarmed. Check to see if there is any abnormality with your vehicle.

If any of the doors is not opened within 30 seconds, all doors will be automatically locked and the system will be set.

When the system is set

Activating the system; When the system detects abnormalities such as follows, it flashes the turn signal lights and turns on the interior light or the turn lights only (depending on the model) and sounds the security horn and vehicle horn of 30 seconds.

• Unlocking any door without using wireless control
• Any door or hood is forcibly opened.
• The battery terminal is disconnected and then reconnected.
• The system control assembly is disconnected and then reconnected
• Abnormal impact is detected when the impact sensor function is on.

Reactivating the alarm;

Once set, the system automatically resets the alarm after the alarm stops.

The alarm will activate again under the same circumstances described in "Activating the system".

Stopping the Alarm

The alarm will be stopped by the following two ways;

• Turn the ignition key from the "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch.

The system can be cancelled by these ways at the same time.

If the battery becomes discharged due to the vehicle being unused, for a long time etc., when the battery is recharged or replaced, the system will activate the alarm. If this happens, immediately unlock any of the doors by pushing the unlock (cancel) switch, and the alarm will stop.

Testing the system

1. Set the system
2. Insert a wireless remote control key into the key hole on the driver's door handle, and unlock the door.
3. Open the door, and an alarm will sound.
4. Stop the alarm by pushing the unlock (cancel) switch.
5. Repeat this operation for the front passenger's door.

Good luck.

on Nov 08, 2010 | Toyota Pickup Cars & Trucks

2 Answers

Why won't my right headlight turn on?


Get test light star in you fuses box if you have juice in you turn signal then is on wiring. If you don't the issue is on you turn stick.

Jul 21, 2015 | 2008 Jeep Liberty

1 Answer

How do I bypass the radio code and anti theft alarm


you cant.
here are the 6 ways.

http://www.fixkick.com/power-elect/Keep-Alive/keep-alive.html#radio

answered on this forum 1000 times.
and zillions world wide, its like the all time #1 question on cars.

Jun 24, 2015 | Cars & Trucks

1 Answer

Reset service


makes no sense?
what in the world is wrong, my bla bla is messing up...??????????
what needs to be reset, NAME it, there are many possible.
RADIO
Nav
ECU/PCM/BCM/TCM
alarm
IMMO
what?

Nov 30, 2013 | 2008 Acura Tl

2 Answers

Ford focus 2003 CL 6000 cd rds e.o.n. keycode or serial number where can i find ?


the ford dealership should have the tools you need to remove the radio at a reasonable price, also if you have the VIN they may be able to give you the code you need.

Sep 01, 2012 | 2003 Ford Focus

1 Answer

Our 1996 3.0 camry has no power at the radio after along time with a flat battery. The fuses in the box under the key are ok - Is there a powerfeed with an inline fuse that can be easily checked or another...


YOU WILL HAVE TO RE ENTER THE ALARM CODE IN THE RADIO; TOYOTA`S RADIO`S ARE ALL THEFT PROOF IF IT LOOSE`S POWER IT WILL NOT PLAY (ie) TURN ON UNTILL THE ALARM CANCELATION PROCEDURE HAS BEEN DONE!? CHECK OWNER`S USER`S GUIDE. CALL A DEALERSHIP!?

Aug 29, 2011 | 1996 Toyota Camry

1 Answer

'08 Liberty Limited - Radio won't hold presets


THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 08-006-08, DATED
FEBRUARY 22, 2008, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL
REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE AN UPDATED
OVERVIEW, REPAIR PROCEDURE AND LABOR TIME.
THE StarSCAN® FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM
THE INTERNET.
StarSCAN® SOFTWARE LEVEL MUST BE AT RELEASE 8.05 OR HIGHER FOR THIS
BULLETIN.
StarMOBILE STANDALONE MODE OR StarMOBILE DESKTOP CLIENT MAY ALSO
BE USED TO PERFORM THIS PROCEDURE.
SUBJECT:
Flash: Driver/Memory Seat or Driver Power Seat Functions Intermittently
OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Memory Seat Module
(MSMD) **and performing calibration on the MSMD with the STARScan.**
MODELS:
2008 (KK) Liberty
2008 (RT) Caravan/Town & Country
NOTE: This bulletin applies to RT vehicles with sales code JT2 and KK vehicles with
sales code LEW built prior to September 21, 2007 (0921XXMDH).
SYMPTOM/CONDITION:
The driver/memory seat and or driver power seat functions can become intermittently
inoperative due to a Memory Seat Module software issue. A software design change has
been made to eliminated these intermittent conditions.

Jul 17, 2009 | 2008 Jeep Liberty

1 Answer

2001 Acura 3.2CL security alarm problem


Make sure your car battery is 100%. (Battery test.) Batteries only last 3-5 years.
If battery power drops down, alarm designed to come on.
Other possibility, if someone in neighborhood nearby (within 500 yards) has a cb radio or ham radio or a service truck with a radio in it, that could set off the alarm intermittently due to same radio frequency.

May 22, 2009 | 2001 Acura 3.2CL

1 Answer

Lightning hit antenna, wiped out radio


Your'e lucky if radio and ant are the only casualties. No vehicle system in the world is designed to survive that kind of power and magnetic pulse!!! Yes...replace them.

Mar 09, 2009 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...