Question about 2003 Mazda MPV
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I had a similar problme to this years ago on a VW that I was driving.
I took it into the the shop and they said that they couldn't find the problem either and couldn't get the car to do it when they tested it.
Then a few weeks later it happened to me again as I was out in the country and an old farmer stopped by to help.
He discovered that the wire leading to the alternator was too thin. It would over heat and then shut the car down. Once it cooled off, it would start up like nothing.
He got a larger piece of wire and and changed it for me right there on the spot. It took about 5 minutes and I was off and running.
I never had the problem again.
I don't know if this is the same thing that you have, but it's worth a look.
Posted on Nov 04, 2008
SOURCE: mazda 2003 MPV door locks
I just fixed this same problem. It happened to me 3 different times in
a month so I got good at it. Before you dive into removing your door
try this. Pull the door handle and release it letting it snap back
several times. The problem is a half open door latch that won't let the
door unlock. Do this as aggressively as you can to attempt to get the
latch to return to its original position. Check the door lock between
Ok, if that didn't work, here is how to remove the door.
1. Remove the screw behind the door latch, you will have to pop the plastic cover off first.
2. Remove the rubber insert in the door handle
3. Remove the screw that is now visible
4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the van.
5. Remove the clips that attach to the lock and to the window controls (these can be a pain)
5. (Optional) Remove the bracket that held the window/lock control module
At this point your door is basically free, it is only held in place with plastic clips that can be easily forced off. If your door were open you would simple pull the bottom of the door out (hinged at the window) and lift it off. But since we can't pull because the door is closed we have to force it out.
From here it is pretty simple. Move the seat all the way back and tip the seat way back. Lift the door panel straight up. You will be breaking 2 plastic clips from the rear part but once you do it just pulls out. This is not that easy because the space is limited but just keep pulling and force the rear end of the door panel past the b-pillar. Once you do this it is free.
Have fun and try to keep the black gook from getting everywhere.
Oh, to fix the door lock just oil/grease it and manually move the mechanism several times.
Posted on Nov 11, 2008
Tips for a great answer:
Aug 07, 2014 | 2003 Mazda MPV
Jan 15, 2013 | 2003 Mazda MPV
Dec 21, 2011 | 2003 Mazda MPV
May 06, 2010 | 2003 Mazda MPV
Jan 10, 2010 | 2003 Mazda MPV
Nov 27, 2008 | 2003 Mazda MPV
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: