Question about 2008 Honda Accord
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: how do remove driver side
My driver's side visor inexplicably fell out the other day and I had to re-install it.
The metal frame has two openings in close proximity for the visor mounting. One is triangular and the other is a hole.
The teardrop portion of the visor has a post which fits into the above mentioned hole. The visor arm is attached to a piece which has three plastic lugs.
There is an opening visible in the last photo from the OP. I used a flat tip screwdriver and pressed IN on the tab inside the opening. This "dis-connects" the two pieces and allows the teardrop portion and the triangular lugs to move separately.
So, to install visor, press the tab, release the two portions, align the post with the hole and turn visor until three lugs line up with the points of the triangle. Push assembly flush with headliner and move visor back and forth until you hear a "click" and the two pieces are connected again. When I did it the click came when I moved the visor far forward (towards windshield). This position was approximately 45 degrees with respect to the line of the top of the windshield. I would imagine the dis-assembly is the opposite procedure.
Hopes this helps.
Posted on Oct 28, 2010
SOURCE: I have a 2003 Accord.
I assume you have tried everything to retract it, wiggle while you push ect.? if so yes the visor will have to be replaced, they (Honda) does not make parts for them.
Posted on Sep 07, 2008
There are little plastic caps that cover the mounting flanges. Use a small flat blade screw driver to release the cover and that will expose your mounting flange.
Posted on Dec 04, 2012
Tips for a great answer:
Mar 05, 2015 | Jeep Cars & Trucks
Sep 30, 2013 | Cars & Trucks
Jan 01, 2013 | Cars & Trucks
Feb 18, 2012 | 2007 Kia Sportage 2.7
Nov 09, 2009 | 2008 Honda Accord
Sep 16, 2009 | 2005 Nissan Murano
Feb 26, 2009 | 1997 Toyota Camry
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: