Question about Ford Falcon

1 Answer

I have a 61 ford falcon 144 ci . I can't seem to find the correct spark plug removal tool.I tried an 18mm spark plug socket then a 18mm deep well socket and it still won't fit. Is there a special tool to remove them ? I'm confused. It shouldn't be this hard.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 95 Answers

You can buy a original car diagnostic tool for you car ,go to the immokm website

Posted on Aug 08, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How change spark plugs


Have a look on the following link for the socket/wrench/tool you will need:
spark plug socket Google Search


To avoid getting the ignitions leads replaced in the wrong order:
Remove ONE lead from ONE plug at a time.
Use the tool/socket to remove that plug by turning anti-clockwise.

Put the new socket in hand tight - this is to avoid cross-threading the spark plug and damaging its threads/threads in cylinder head.

When the spark plug is hand-tight/finger tight, tighten it with the socket /tool. Just 'gently tighten it up' - do not overtighten.

Replace the ignition lead and then move onto the next plug.


removing spark plug Google Search

Feb 10, 2016 | 2005 Ford F-150

1 Answer

What size socket wrench is needed to replace plug


The most common size is 5/8" or 16mm. It has to be long / deep-well.
Other sizes are 11/16" / 18mm or even 13/16" / 21mm. Also deep-well.

Most dedicated spark plug sockets have a rubber piece inside, which gently holds the ceramic insulator.

What car make/model?

Nov 27, 2015 | Cars & Trucks

1 Answer

Need to change the spark plugs for a ford falcon bf lpg 2005 model


I think you need a special long spark plug socket to reach the plugs because the plugs are deep in the cylinder head if hemi type engine, hope this helps!

Jun 28, 2014 | 2005 Ford Falcon

1 Answer

Socket on spark plug


Some Japanese cars require an extra thin spark plug socket to get deep enough around the plug itself.
If your socket is normal, then try searching for a thinner socket.

Nov 12, 2012 | 1994 Nissan Altima

1 Answer

How to get to the front moter mount on a murcery sable 1993


I did them at Ford, but it's been awhile. I believe you at least need to unbolt the A/C compressor. But make sure you get a swivel 18mm medium depth socket, a shallow 18mm isn't deep enough to get on the nut. And there isn't enough room to get a deep well 18mm onto the nut. They are rather difficult to do.

May 05, 2010 | 1993 Mercury Sable

1 Answer

1993 ford escort spark plug removal.


16mm plug spanner, a regular socket is ok so long as it is a tight fit.
Use an extender and a crossbar on the socket instead of a ratchet, that way you can keep the socket dead straight.

Sep 21, 2009 | 1993 Ford Escort 4 Door

3 Answers

Replacing old spark plugs and spark plug wires


You need to remove the coil pack that sits on the spark plugs..Once out then you need the right tool to loosen & remove spark plugs...

Aug 04, 2009 | 2001 Dodge Neon

1 Answer

Chaning spark plugs 02 expedition


no special tools,this is what tools you will need:.7mm socket for the coil packs where underneath them is a deep hole and down there is the plugs---8mm socket for the fuel rail bolts(for the left side sitting in it)which i would use 1/4 inch drive for these--- 5/8 plug socket---6 inch extension---3 inch extension---ratchet---swivel---which i would use 3/8 inch drive for these---and maybe long needle-nose pliers incase the rubber boot from the coil packs come off and sticks to the plug.

Jun 03, 2009 | 2002 Ford Expedition

1 Answer

What would be the best way to remove/install spark plugs with out a spark plug socket?


You could use a standard deep socket, however, a plug socket has a rubber insert that helps prevent breaking the porcelan . If necessary to do this without the correct tool, keep the socket very straight...any angle can break the plug.

Apr 28, 2009 | 1987 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...