Question about 2002 Ford Escape

Open Question

2002 ford escape automatic shift cable adjustment screw ,detail pic

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
fknstart
  • 404 Answers

SOURCE: removal of rear brake drum 2002 ford escape

make sure handbrake is off take wheel off hit the drum with a mallet not steel,as it will brake,hit on outter diametter face of drum, try and rotate as you twist off

Posted on Jan 05, 2009

Ad
chuck943
  • 783 Answers

SOURCE: ford escape 2002 firing order

V6 1-4-2-5-3-6 back bank pasenger side right to left cylinders 1 2 3
front bank passenger side right to left 4-5-6
4 cly 1-3-4-2

Posted on Jun 23, 2009

MEGA_MUZIK
  • 54 Answers

SOURCE: Ford Escape Automatic Only Goes Into 1st Gear Manually

it sound like you have a vacum leak or your shifter cable may need adjusted

Posted on Oct 27, 2009

  • 70 Answers

SOURCE: cruise control ford escape 2002. ford escape

If the cruise lamp comes on and the cruise does not set i would advise inspecting the cruise cable and make certain it is not broken, if ok the the servo has likely failed.

Posted on May 29, 2010

  • 1 Answer

SOURCE: My 2002 ford escape shift cable has come of the

Well, being that Ford and every other major auto manufacturer are irresponsible and will never take the blame for something that is obviously their fault, then you are screwed.

Posted on Sep 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjust the brake drum of ford escape 2002


theres a small rubber plug on back of it just use screw driver to turn the toothed wheel after u remove the plug

Aug 11, 2014 | 2002 Ford Escape

1 Answer

2002 ford escape the gear shifter moves freely up and down the column with no resistance what so ever


If the vehicle will not go into gear as well, then the chances are good that the shift cable has become disconnected at the column or the transmission, or it simply snapped

Feb 17, 2011 | 2002 Ford Escape

1 Answer

My 2002 Escape is stuck in reverse


I am uncertain what escape you drive but if this is the 4 cylinder version, then you will require a new transmission or have your transmission serviced. You asked why? Because Ford did not put a transmission cooler on the 4 cylinder, but only on the 6 cylinder version with the tow package, which prevents your transmission from overheating. Furthermore, you have to change your transmission fluid at greater intervals to prevent harm to your transmission.

Moreover, is this a manual transmission or automatic
?. If this is a automatic, you maybe able to manipulate the shift linkage cable on the transmission and get it out of reverse.

Jan 04, 2011 | 2001 Ford Escape

1 Answer

My 2002 ford escape shift cable has come of the shift lever pin. I am told that a grommet has worn out and fallen off and that the only repair is to replace the entire cable. Is this true?


Well, being that Ford and every other major auto manufacturer are irresponsible and will never take the blame for something that is obviously their fault, then you are screwed.

Aug 09, 2010 | 2002 Ford Escape

2 Answers

Shift of auto-transmission on a 2002 ford f-150 need to adjust


Most aftermarket performance programmers will adjust your shift points along with your enging parameters. As far as turning a screw or something on board of your pickup, no.

Apr 24, 2010 | 2002 Ford F150 Regular Cab

1 Answer

Where is the PRNDL Switch on a 2003 ford escape?


it is located on the side of the transmission, it is screwed to a braket and mounts onto the shaft the the shift cable turns to select gears. driver side of the transmission, it must be adjusted, just use the old ones adjustment for the lock down point of the new one.

Nov 03, 2009 | 2003 Ford Escape

1 Answer

Ford Escape Automatic Only Goes Into 1st Gear Manually


it sound like you have a vacum leak or your shifter cable may need adjusted

Oct 26, 2009 | Ford Escape Cars & Trucks

1 Answer

Shift cable disconnected from transmission


Sounds like either a part is broken or something needed is missing. First you need to know what is supposed to be and then you can figure "what is or isn't".
If you don't know enough about it, I would suggest you find someone who is better qualified to help make a determination here.

Oct 10, 2009 | 2002 Ford Escape

Not finding what you are looking for?
2002 Ford Escape Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...