Question about Cars & Trucks

Open Question

Manual gor a starlyte 1986 lazer tag gun - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No keys,no money,allready ran a hot to the fuel pump and starter.is there a way to solder on the alarm computer pins and skip the pats system .im screwed


If you have the original owners manual and dealer packet, you can look for a small tag called a key code. With this you can get a duplicate key made at the dealership.

Jun 11, 2015 | 2003 Ford Focus

1 Answer

What is the gear ratio in a 1986 ramcharger rear wheel drive


try this link, give you a lot of info on your vehicle.
http://www.decodethis.com/

Apr 17, 2013 | 1986 Dodge Ramcharger

2 Answers

Low tire pressure, what is the recommended tire pressure


35 Psi. is pretty much standard, but you can look at the tire inflation label inside the drivers door. It may be on the edge of the door or on the post inside the door.

Jan 11, 2011 | 1986 Ford Escort 4-Door

1 Answer

How do i take the soft top cover off the top of c...


The cover to the roof is glued on.Solvent will break up the the glue although the vinyl covering will have to be removed first. Using a heat gun will make this task more easier to do. Home Depot and many hardware stores sell heat guns at a decent price these days

May 20, 2010 | 1986 Mercury Grand Marquis

1 Answer

Imobliser on my renault megane cabriolet 1998 r reg wont turn off


the pins on the lazer bulb in your keyfob has snapped off caused buy pressing the button too hard. (the red light will still come on but the key wont work)

heres what to do

open your keyfob and pull the lazer bulbs pins to the other side of the chip board. solder it to the wrong side where you see the nipples (dont worry there still in the right place) and shove a bit of bog roll in there to stop the chip board moveing when you press the button

Oct 20, 2009 | 1986 Renault Sport

1 Answer

Wy the secondary air pump keeps failing on my 2001 bravada


Most likey a bad thermactor valve is damaged and is allowing hot air to enter the pump causing it to overheat and fail. Need a lazer heat gun to see how hot it is getting.

Oct 15, 2009 | 2001 Oldsmobile Bravada

1 Answer

Need timing for a 1986 dodge ram 50 2.0l


take it in get it done or get yourself a timing gun and so it yourself.

Sep 30, 2009 | 1986 Dodge Ram 50

1 Answer

I have changed the relays and fuses checked cooling fans which worked when direct power was appied hooked everything back together fans still will not turn on also cooling fan sensor was changed also temp...


replace coolant sensor connector?if so can u get a thermo lazer gun to check the block temp? this will tell u if the gauge is incorect,,,go ahead a bleed all the air out of cooling system and see if that does the trick

Jul 05, 2009 | 2001 Chevrolet Malibu

2 Answers

Vaccum hoses are missing. 1986 Nissan 720 4X4


truck normally has a vacuum hose routing diagram on under side of hood on drivers side.also look for metal tag on center of engine compartment fire wall which gives you a motor id @ and trk model # you can then know what engine vacuum diagram you need.i have a diagram for an 86 720 series Z24 carb engine that can be copied off of truck..chris

Apr 02, 2009 | 1986 Nissan Pickup 4WD 1986

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...