Question about 2004 Honda Accord

1 Answer

P1676 error on a ford excape - what is the cause of this error code

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 20,706 Answers

Is this Autozoned code? or a real scan tool. for modern cars.

did they show you, tell you or did you write it down wrong?



do post what tool produced this code, its rare.



a Honda Ford? really??? is this an engine swap?

if not a honda. you might want to post to Ford, as we dont have books on fords here.

but like all DTCs there are many causes, and the tech does the test

stated in the FSM. got FSM? factory service manual... youd need that.



no engine stated, or any year, Ford, so not possible to answer lacking that..

P1 xxx means factory ford only code. do not read other makers of cars codes, just ford. or fail big time..



i looked from 05 to 2011 codes for ford escape and get zero

Posted on Jan 30, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please help my ssangyong rexton2.7 D gazoil Stuart only with Stuart pilot .because code error P11 48 C1623 P1676. P0343 Think you


C1623 is with in the chassis sensors P1148, P1623, P1676 is in the ECM not on my list of codes not sure what it is. call parts house and they can tell you what it is. PO343 is camshaft position sensor circuit high input. P1148 not sure not on my list of codes they may be in the newer codes list but I don't have an updated list

Jun 18, 2014 | Cars & Trucks

2 Answers

2000 ford expedition I changed plugs pcv egr valve cover gasket I am still getting power loss and hesitation in drive and sometimes it stalls plus I have a b1676 code


There is no B1676 DTC. You probably mean P1676 which refers to incompatible injector data. Probable causes are:
1. Control unit software needs updating
2. Faulty PCM or ECM

Checking these two probable causes may get performance back to normal.

Jan 16, 2014 | Cars & Trucks

1 Answer

1999 honda oddesy van with trouble code p1676


not sure what it means but here is what the code says
P1676
FPTDR Signal Line Failure

Sep 17, 2013 | Honda Odyssey Cars & Trucks

1 Answer

Oem code p1676


http://www.gmforum.com/obd-ii-trouble-shooting-153/p1676-284196/

Feb 24, 2013 | 1999 Chevrolet Malibu

2 Answers

P1676 audi


VAG OBD Error Code Details for P1676 Drive by Wire-MIL Circ. Electrical Malfunction

Aug 31, 2012 | Cars & Trucks

1 Answer

2005 ford excape with fuel rail pressure sensor, getting error code. Is there a diagram that shows where it is located if i want to replace it my self.


It is a fuel rail pressure switch

So you look on the fuel rail

If you dont know how to do that or test it,
you don't get involved

Just because you got a code, doesn't mean that is a problem

I called a Lincoln Dealer earlier this year & they only sold
4 in four years total, for all vehicles they service & outside parts sells

So that is not a common failure at all

Sep 22, 2011 | 2005 Ford Escape

2 Answers

Check engine light code p1676 Chevy lumina Ltz


Trouble Code: P1676 (3.8L V6 VIN K Auto)
Evaporative Emission (EVAP) Purge Solenoid

Number of Trips to Set Code: 1
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Trouble Code Conditions:
Conditions for Setting the DTC.
  • The ignition is on.
  • An improper voltage level has been detected on the output circuit which controls the EVAP purge solenoid.
  • The above conditions are present for at least 30 seconds.

Possible Causes:
  • Poor connection at the PCM. Inspect harness connectors for backed out terminals, improper mating, broken locks, improperly formed or damaged terminals, and poor terminal to wire connection.
  • Damaged harness.
  • Inspect the wiring harness for damage. If the harness appears to be OK, disconnect the PCM, turn the ignition on and observe a voltmeter connected between the EVAP purge solenoid control circuit and ground at the PCM harness connector while moving connectors and wiring harnesses related to the EVAP purge solenoid. A change in voltage will indicate the location of the malfunction.

1998 Chevrolet Lumina - Powertrain - Engine Controls - 3.8L - DTC P1676 Evaporative Emission (EVAP) Purge Solenoid Control Circuit

Aug 13, 2010 | 1998 Chevrolet Lumina

Not finding what you are looking for?
2004 Honda Accord Logo

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...