Question about Buick Skylark

Open Question

1983 buick skylark cooling fan not working - Skylark Buick Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 625 Answers

SOURCE: Overheating 1993 Buick Skylark

it could be a fuse or fan relay, or a stuck thermostat, i will recomend to aply stright power to radiator fan to see if works, if don't replace fan and fuse, but if does, then it might be the thermostat, one very easy way to test the cooling fan system is by unpluging the coolant sensor with the car runing, if fan come on whit car runing and sensor disconected, the the system is ok, and might be a bad sensor, or stuck closed or open thermostat. please leave feedback if this take care of your problem

Posted on Jul 15, 2008

Ad
stormbrewin
  • 426 Answers

SOURCE: 1997 buick skylark electric fan not working

Your next step now that the fan is not an issue is to use a test light/probe to check that you have power into the fan switch and out Sounds like no power to the switch but check first.If you have power in and none out switch is suspect.Usualy this problem is fuse or relay based so pulling out the relay and swapping it for another out of your engine bay relays can isolate wether its a relay.As far as the fuse goes im sure you have checked that and if not swap with another of the same color/amp rating.If you have no joy then look to the earth cicuit,you can put your own in spliced into the original earth wire and bolt/screw to good body earth.Good luck

Posted on Oct 27, 2008

  • 341 Answers

SOURCE: Horn will not work on Buick Skylark 1998

the horn relay is located under hood in the fuse box

Posted on Dec 11, 2008

  • 73 Answers

SOURCE: 1995 Buick LeSabre cooling fans not working

check the fan relay swich or the fuse

Posted on Mar 13, 2009

  • 279 Answers

SOURCE: location of cooling fan relay 1993 buick skylark

Back of firewall,second relay from the passenger side of the vehicle.

Posted on Feb 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my 92' Buick Skylark keep dying Out.?


You have 2 issues here #1 the engine is running hot . Test the cooling system fans they seem to be not working. #2 car dies i would start with testing the secondary ignition (spark).

Apr 30, 2014 | 1992 Buick Skylark

2 Answers

How do I test the radiator fan on a 1995 buick skylark?


disconnect the cooling fan switch start your engine the fan need start work if don't check your fuse and relay

Mar 20, 2014 | 1995 Buick Skylark

1 Answer

Cooling fan not running as temp. heats up.


most time coolant temperature sensor faulty.but check cooling fan fuse and relay.then hot wire the cooling fan if fan runs.problem in the fan wiring or pcm.if every thing else okay.if cooling fan dont run when hot wired the cooling fan need replacing fan motor has internal open winding circuit.

Apr 15, 2011 | 1995 Buick Skylark

1 Answer

Where buick 1994 skylark fan relay located


in the right hand rear of engine compartment behind strut tower


86859b9.gif

Mar 28, 2010 | 1994 Buick Skylark

1 Answer

Location of cooling fan relay 1993 buick skylark 3.3 v6


Back of firewall,second relay from the passenger side of the vehicle.

Nov 14, 2009 | 1993 Buick Skylark

1 Answer

Crank setup 1971 350v8 buick skylark


do you mean firing order?if so and you have a buick engine it is
starting with the driver side cyl 1-3-5-7 the passenger side is 2-4-6-8.line up your crank shaft on the mark it has to be on compression stroke the wires go 1-8-4-3-6-5-7-2. let me know how you do .

Jan 09, 2009 | 1983 Buick Skylark

1 Answer

Bypass 1983 buick skylark


yes you can plug it off under the hood by the firewall

Nov 18, 2008 | 1983 Buick Skylark

1 Answer

Cooling


most cooling fans on GM products are set to come on at 212 F. Its temperature input comes from your coolant temperature sensor--to the ECM which closes a relay to turn on the electric fans. Hope this helps.
Also atleast one of your fans should come on when you turn on your air conditioner that should let you know if your circuit is working.

Oct 23, 2008 | 1995 Buick Skylark

2 Answers

Overheating 1993 Buick Skylark


it could be a fuse or fan relay, or a stuck thermostat, i will recomend to aply stright power to radiator fan to see if works, if don't replace fan and fuse, but if does, then it might be the thermostat, one very easy way to test the cooling fan system is by unpluging the coolant sensor with the car runing, if fan come on whit car runing and sensor disconected, the the system is ok, and might be a bad sensor, or stuck closed or open thermostat. please leave feedback if this take care of your problem

Jul 15, 2008 | 1993 Buick Skylark

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...