Question about 1999 Jeep Grand Cherokee

1 Answer

Door lock cylinder broke - 1999 Jeep Grand Cherokee

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Jeep Master
  • 1,449 Answers

Remove the trim inside your door .put an old key in the lock to help to pull it out.shine a torch on the inside of your door after removing the trim.you cylinder can be held on with screws ,or a circlip. you will see with your torch which it is.then lift out your broken cylinder.on the outside of your door.now to refit the new one put your key in the cylinder .now fit the circlip or screws to lock in place.

Posted on Dec 07, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side door lock barrel turns, but does not unlock the door + my key FOB is dead


Well your FOB REMOTE Battery could be dead, try replacing it
on you lock cylinder, sounds like the clip that holds it fell off, broke or rusted off ? You have to take your inside door panel off to check this, there are screws and clips that hold your door panel on, some screws are around your arm rest, inside door handle, and there might also be some around the panel itself, the clips are behind the panel, by using a flathead screwdriver you can pry these, by sliding the screwdriver around the panel, but be careful not to crack your panel.
once off, check your door lock cylinder, there should be a U shape clip holding it, if not check the bottom of your door.
if your lock is molded in the plastic door handle, then you have to take this off

May 15, 2014 | 2004 Land Rover Range Rover

1 Answer

I broke my key in the door and i cant get it out


the lock cylinder will have to be removed and disassembled; I recommend a locksmith because it is very touchy working on lock cylinders. if the lock has been giving you problems before and you have a spare key, you can recode a new cylinder to the original.

Mar 14, 2013 | Cars & Trucks

1 Answer

I broke my key off in the ignition,what i need to do to get it out


A lot depends on if the ignition switch will rotate or not. If it can rotate, the ignition lock cylinder can be removed fairly easilly and either the lock cylinder can be replaced, or you can take the existing lock cylinder to a locksmith for repair. If you replace the lock cylinder, then you will also probably get new keys for the new cylinder. These will not work your door locks however, so you will have to use two keys.

If the lock cylinder will not rotate, some extensive steering column disassembly will be required to get the lock cylinder out and several other parts may need to be replaced in the process.

Nov 09, 2011 | 1998 Saturn SL

1 Answer

I have a 2006 porsche 911. car locked in garage. key remote broke(no spare) and driver door lock cylinder broke. how do i get in car without braking glass or towing to dealer.


get a wire make a hook and insert it in the door from the window rubber at the lock side when u feel its stuck to the lock lever pull it gentle try this severel times till u get the lock opened

Jan 29, 2011 | Porsche 911 Cars & Trucks

1 Answer

The key lock on the exterior of the driver's door has come loose. How do I fix it?


you have to get to the inside door panel. there should be a clip holding tha lock cylinder in place. check to see if it broke or came loose

Mar 01, 2010 | 2003 Nissan Murano

1 Answer

Key ignition switch needs replaced lock cylinder how do i change key broke off inside damaged needs replaced wires broke off behind key switch


disconnect the battery and pull the air bag fuse out to diable the air bag. Remove the steering coulmb trim covers and expose the lock cylinder. If the lock cylinder can be turned and is functional then push in the bottom tab and turn the lock cylinder then pull the whole cylinder out. If the keys broke inside and the lock cylinder is not functional the bottom tab will need to be drilled out.
graphic.aspx?mod=reptiff&module_id=1&session_id=%7b812b1a44-e9f7-498d-9233-3843c35aa6d4%7d&image_guid=00010135&print_bw=0&

Feb 27, 2010 | 2000 Pontiac Sunfire

2 Answers

The driver side door lock broke on my 98 jetta door want open


according to my partsman (who has had great advice for many years), you do not have to remove the door panel to replace the door handle which contains the cylinder lock. the handle is released with a screw which you can see when you open the door. you will need a starhead screwdriver or socket. A new handle costs around $40 at a parts store in my area. call around for a locksmith who will re-key your key to the new lock or use the key which comes with the new lock, your choice. i am in dealing with this also

Jan 02, 2009 | 1998 Volkswagen Jetta

1 Answer

2003 chevy impala broken handle


raise the window.

remove door pannel and water shield.

remove the plastic clips that secures the lock cylinder to the latch rod.

slide the lock cylinder clip out of engagement and remove lock cylinder from the door

disengage the plastic clip that secures the outside handle to latch rod.

remove bolts

then pull it out of door


Nov 23, 2008 | 2003 Chevrolet Impala

1 Answer

1993 nissan maxima drivers door lock cylinder


you have made a boo boo somewhere,are you a certified city and guilds technician,if not then you shouldnt be repairing customers cars

Oct 31, 2008 | 1993 Nissan Maxima

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...