Question about 1999 Chevrolet Suburban

Open Question

1999 chevy suburban door lock control module location

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

1beertap
  • 32 Answers

SOURCE: PCM module, ECM module 1996 Chevy Suburban K model

Powertrain Control Module = under right side of dash, near blower motor.
Engine Control Module = same as above
Vehicle Control Module = same as above

All Suburban vehicles are equipped with only one of these choices. Good luck.

Posted on Oct 04, 2008

  • 120 Answers

SOURCE: no air

there are 2 of them one is at the reciever dryer inside the engine compartment (its inside the low pressure side ac line) the other is inside the unit in the rear and is a different style with a cap tube attached

Posted on Dec 18, 2008

  • 1 Answer

SOURCE: Code for automatic door locks on 1999 Chevy silverado

you have to take it into the dealership for a 1999. the dealer needs to change the settings in the BCM (body control module). in 2000, the BCM came preprogrammed to allow the owner to change the door lock settings at home. unfortunately for a 1999, it has to be done at the dealership.

Posted on Jan 07, 2009

dennymulford
  • 1055 Answers

SOURCE: 1999 chevy suburban misfire

could be one of several things
1) run a compression check, if it low on that cyl then you have a blown head gasket or burnt valve
2) could be the enjector

Posted on Feb 27, 2009

jrw4u
  • 62 Answers

SOURCE: Transmission Control Module

Before condemning the transmission, I would check the shift cable for proper operation. Look at the side of the transmission where the shift cable attaches. Have someone shift the transmission from PARK to FIRST. The engine should not be running. If the operating lever on the transmission moves, then you probably do have an internal transmission problem. 78151957.gif
If the operating lever does not move, you have a broken shift cable or it has popped of it's attachments at the operating lever or gear shift handle.
78151960.gif
A bad Transmission Control Module (TCM) would not keep it from shifting. In the event of a bad TCM, the transmission would go into fail safe mode and you could continue driving the vehicle.

Posted on Apr 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the fuse for the power seats located?


PWR ACCY Fuse Breaker A
25A Located in the instrument panel fuse box.
I/P Fuse Box In the left lower kick panel
Power Seat(s), Illuminated Entry Module, Power Door Lock Switches, Remote Control Door Lock Receiver, Power Door Lock Control Module.

Do you have a problem with any of the other components listed ,if no the breaker is good .
Do you have

Jan 31, 2016 | 1999 Chevrolet Express

2 Answers

Repair heater control in a 2000 chevy pick up


The best way to get an answer for this go onto Youtube and they usually have fixrs for everything. Between last year and this year I have saved myself thousands of dollars repairing stuff myself through youtube.

Dec 31, 2014 | Cars & Trucks

1 Answer

What does fuse #10 operate in 1999 Chevy Suburban


Pretty sure it is a 10amp fuse for inflatable restraint control module

Dec 08, 2014 | 1999 Chevrolet Suburban

2 Answers

I have a 1998 chevy suburban. The dome lights don't work. checked fuse box under hood. All good. Are there other fuses on the truck?


Instrument Panel Fuse Block
The instrument panel fuse block access door is
located on the driver side edge of the instrument panel.

Pull off the cover to access the fuse block.

The vehicle may not use all of the fuses shown.

Fuses Usage
1 Rear Seats
2 Rear Accessory Power Outlet
3 Steering Wheel Controls Back light
4 Driver Door Module
5 Dome Lamps, Driver Side Turn Signal
6 Driver Side Turn Signal, Stop lamp
7 Instrument Panel Back Lighting
8 Passenger Side Turn Signal, Stop lamp
9 Passenger Door Module, Driver Unlock
10 Power Door Lock 2 (Unlock Feature)
11 Power Door Lock 2 (Lock Feature)
12 Stop lamps, Centre High Mounted Stop lamp
13 Rear Climate Controls
14 Power Mirror
15 Body Control Module (BCM)
16 Accessory Power Outlets
17 Interior Lamps
18 Power Door Lock 1 (Unlock Feature)
19 Rear Seat Entertainment
20 Ultrasonic Rear Parking Assist, Power Liftgate
21 Power Door Lock 1 (Lock Feature)
22 Driver Information Centre (DIC)
23 Rear Wiper
24 Cooled Seats
25 Driver Seat Module, Remote Key less Entry System
26 Driver Power Door Lock (Unlock Feature)

Aug 23, 2011 | Chevrolet Suburban 2500 Cars & Trucks

1 Answer

The wipre control module on my 2004 chevy suburban needs to be replaced. where is it located?


Hi, the wiper module is mounted to the wiper motor, it is held on by 3 screws (torx), and has 1 plug going to it. This may be subject to a recall, and you can check with a dealer, as it may be a free repair. Good luck...Coop.

Dec 24, 2010 | 1999 Chevrolet Suburban

1 Answer

The fuse for the door locks on my 1999 chevy suburban blows as soon as i replace


It is most likely a fault in one of the buttons,you can unplug one of the door lock buttons ,at a time,to find out,but do not unplug the master,the one for the driver,if none of the other door lock buttons is the problem,it will be the master,try it last.

Aug 22, 2010 | 1999 Chevrolet Suburban

1 Answer

Automatic door locks / 2001 Chevy Suburban


Your book should give you program options for the door locks If your fob wont work either you got a relay for the door lock bad it is located in the fuse panel push the door lock button and find the one that is clicking

Apr 11, 2009 | 2001 Chevrolet Suburban

1 Answer

2004 Chevy Surburban. The driver side mirror will not work using the switch on the door. Also the auto lock has stopped working. I think I have to remove the inside door panel to check the wiring.


On todays newer vehicles, the drivers side controls are contained within an electronic "control module". If only certain functions have stopped working, you are correct, the door panel will most probably have to come off. This will be followed by the removal of the master control module and a trip to your nearest GM dealership, salvage yard or other parts source to aquire a new module. I do not believe you will find a problem within your wireing.

Feb 21, 2009 | 2001 Chevrolet Suburban

3 Answers

PCM module, ECM module 1996 Chevy Suburban K model


Powertrain Control Module = under right side of dash, near blower motor.
Engine Control Module = same as above
Vehicle Control Module = same as above

All Suburban vehicles are equipped with only one of these choices. Good luck.

Oct 04, 2008 | 1996 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...