Question about Cars & Trucks

Open Question

Viber for samsung c5212


Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2001 ford focus2.0 Zteck runs loud and viberates at start up and at highway speeds also /

ur rite probly worn--also shocks are leading cause of moving vibration--2nd would be drive shaft

Jun 21, 2012 | 2001 Ford Focus

1 Answer

Between 2300-2800rpm viberation thro body drive feels course

You may have bad baffles in the Exhaust muffler or the Catalytic Converters. Also some Manufacturers put Tuning weights on Exhaust pipes. Since the problem seems to be isolated to engine RPM, you have eliminated many of the other possibilities in the Drivetrain by your description.

If this would happen to be a Ford V-8 with Cam Phasers, they can get out of sync and cause the engine to vibrate. Check your Vibration Damper bolt as a loose pulley can vibrate.

Jan 15, 2012 | Cars & Trucks

1 Answer

1998 Audi A4 Quattro Sedan 2.8L Major viberation at 15 mph in center of the car. Under 15mph it smoothes out. Feels like rear drive shaft or u-joint is shot but I'm not familiar with Audi. It started a...

have you checked your calipers? They may be sticking putting lots of strain onto the drive shaft causing it to vibrate.

With all the recent snow and grit on the roads you may have some caught in the mechanism meaning it cant release.

Just a small thought to start to determine the problem.

Jan 07, 2011 | 1998 Audi A4

1 Answer

When in low idle has a bad viberation seems to to less viberation when accelerating

Common problem. Check your motor mounts and transmission mounts, more than likely it's the motor mounts. While they may "look" OK from the outside, the mounts tend to crush and not be as high as they need to be. This problem has is just a nuisance and won't hurt the performance of your TB. Typically this problem will start out only happening when it's a cold engine, then go away once the engine has warmed up. But will get worse as time goes on. Buy OEM mounts as aftermarket mounts won't be as stiff and a lot of times end up with vibration quickly after they are replaced, so don't waste our money. Hope this helps! Good luck.

Jan 02, 2011 | 2005 Chevrolet Trailblazer Ext

1 Answer

Ford f250 viberation high speed 65mph

Check the U-joints and center carrier bearing on the drive line.

May 24, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

1998 chevy blazer-vibration on driver side

The ujoints can cause a driveline vibration. How bad is the vibration? it is possible a tire slung off a wheel weight. this is kinda common.

Dec 05, 2008 | 1998 Chevrolet Blazer

2 Answers


This sounds like a case of bad gas affecting your vehicle's smooth operation. Try going to an auto parts store and getting some gas treatment next time you need to fill up. Add it to your gas tank at that time, and it should help. I had the same problem, and this worked for me. Good luck!

Nov 11, 2008 | 2008 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides