Question about Cars & Trucks

Open Question

3100 sfi v6 engine diagram

What is a bypass valve?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 92 Answers

SOURCE: replacing thermostat on 3100 sfi v6

1. drain coolant from radiator
2. unbolt and remove the water neck from the engine block (it's attached to the upper radiator hose) and scrape any leftover gasket material off of the mating surface w/ a razor or gasket scraper, being careful not to actually gouge the metal
3. pull thermostat out of engine block (it's easy to see w/ the water neck off)
4. scrape any gasket material off mating surface on engine side, being even more careful not to gouge the metal here
5. place new t-stat on engine side opening
6. place gasket over the thermostat (you can put a thin bead of RTV sealant on both sides of the gasket if you wish, some people think it's overkill, but i hate doing things twice)
7. replace water neck
8. refill cooling system, use the little brass bleeder screw on top of the motor to bleed out the air until a steady stream of coolant is coming out after the engine is warmed up. close the screw.

Posted on Sep 29, 2009

Ad
  • 15 Answers

SOURCE: 3.1l mpfi engine swap with 3100 sfi

all you would really need is, maybe a transmission im not sure if your old one will bolt up. Make sure you take the entire harness and ECM. you might need some odd things along the way

Posted on Sep 30, 2009

  • 154 Answers

SOURCE: I need the firing order for a 1997 3100 sfi v6

93fa5d4.png

hope this helps

Posted on Apr 23, 2010

  • 7 Answers

SOURCE: Firing order for 3100 sfi v-6 engine diagram

if it has a coil block for each plug wire, it goes 1-2-3-4-5-6

Posted on May 17, 2010

emissionwiz
  • 76682 Answers

SOURCE: what is the fireing order for a 3100 sfi v6 egine

here ya gob57c358.gif

Posted on Oct 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Will a 2002 Pontiac 3100 interchange with a 2000 Buick 3800?


Not really.
The 3100 is a Chevy 2.8 and the 3800 is a Buick engine.
Most everything is different including exhaust manifolds, engine brackets, and wiring.

Dec 30, 2015 | Pontiac Cars & Trucks

1 Answer

Gm 3100 sfi v6 belt pulley diagram or


Go to autozone dot com and make a free acount, then logon to that account, put in the year, make and model. Look at the free repair guides for that info.

Apr 06, 2014 | 2004 Pontiac Grand Prix

1 Answer

What is the most effective fuel injector cleaner for a 3100 v6 sfi engine?


I always use this one in all GM motors
http://www.amazon.com/Chevron-Techron-System-Cleaner-65740/dp/B00092893E

May 16, 2011 | 1999 Pontiac Grand Prix

2 Answers

On a 3100 sfi v6 if a egr valve electrical pluging is not conected would it stop the motor from starting ?


It's not going to stop the engine from starting but your engine will probably make detonations and a lot more symptoms

May 15, 2011 | Pontiac Grand Prix Cars & Trucks

1 Answer

How much does it cost to replace a starter in a 1998 Ford Contour 4cylinder engine?


It depends on the engine size.
For an InLine 4 Cylinder-122 2.0L CNG DOHC VIN Z SFI :$178.42
For an InLine 4 Cylinder-122 2.0L DOHC VIN 3 SFI : $178.42
For a V6-153 2.5L DOHC VIN L SFI : $152.93
For a V6-153 2.5L VIN G (24 Valve) SFI : $152.93

Hope this was helpful.

Dec 16, 2010 | 1998 Ford Contour

1 Answer

Firing order for 3100 sfi v-6 engine diagram


if it has a coil block for each plug wire, it goes 1-2-3-4-5-6

May 17, 2010 | 1997 Pontiac Grand Am

1 Answer

Replacing thermostat on 3100 sfi v6


1. drain coolant from radiator
2. unbolt and remove the water neck from the engine block (it's attached to the upper radiator hose) and scrape any leftover gasket material off of the mating surface w/ a razor or gasket scraper, being careful not to actually gouge the metal
3. pull thermostat out of engine block (it's easy to see w/ the water neck off)
4. scrape any gasket material off mating surface on engine side, being even more careful not to gouge the metal here
5. place new t-stat on engine side opening
6. place gasket over the thermostat (you can put a thin bead of RTV sealant on both sides of the gasket if you wish, some people think it's overkill, but i hate doing things twice)
7. replace water neck
8. refill cooling system, use the little brass bleeder screw on top of the motor to bleed out the air until a steady stream of coolant is coming out after the engine is warmed up. close the screw.

Sep 29, 2009 | 1998 Chevrolet Lumina

1 Answer

3.1l mpfi engine swap with 3100 sfi


all you would really need is, maybe a transmission im not sure if your old one will bolt up. Make sure you take the entire harness and ECM. you might need some odd things along the way

May 11, 2009 | 1992 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...