Question about Cars & Trucks

Open Question

Honda aquatrax engine missing like running on 2 to 3 cylinders

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: winterize a 2004 4-stroke Honda Aquatrax F-12

i put oil in mine and i do not even start it and in a day its low on oil and theres no oil leeks in the compartment.

Posted on Sep 11, 2008

Ad
bbbman78
  • 680 Answers

SOURCE: engine running rough missing diagnosed

What kind of ford?? In any event...number 2 is the second one back on the passenger's side. The coil pack is about 75.00. the spark plug anywhere from 3 dollars to 12 dollars. Hope that helps. if so please leave a comment.

Posted on Dec 02, 2010

caroldon
  • 17130 Answers

SOURCE: Honda Accord 1994 Rough Idle, often miss cylinder

A check on the spark plugs of the 2nd and 3rd cylinder must tell the story. If you see there is a dirty plug, oil soaked or badly burnt we need to check on the firing and fuel delivery.
First of all check for compression if there is oil smearing, it can be due to weak oil rings or compression rings or a faulty bore in case the engine has clocked a great deal.
Also check the valve settings before the firing - spark intensity of the 2nd and 3rd plugs are confiremed. Check the HT wires to the plugs as you have checked the remaining sections. I hope this must give an indication of the lurking fault.

Posted on Oct 05, 2011

SOURCE: cylinder 2 on my 98 honda civic is misfiring

#2 did what ? So it didn't drop rpm,then it
wasn't contributing much as the other were

You got a bad wire or module or whatever your car has

Check the injectors listen to them with a long screw driver
to your ear

Posted on Nov 29, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1996 honda accord lx did not pass smog due to


these codes indicate there is a miss fire on cylinders 1 and 2 hence the 0301 and 0302 code the 1300 just indicates multiple engine miss fires. so anything that can cause these cylinders to miss fire need to be attended to in order to fix your problem.

Sep 20, 2014 | 1996 Honda Accord

1 Answer

Toyota


I think you have burnt valve seat or head gasket either cylinder head has to be removed

Nov 23, 2013 | Cars & Trucks

1 Answer

I have a 98 honda accord 5 spd it has a 4cyl motor vtech i just need to know how to fix a miss fire in cylinder 2 and wich one is cylinder 2


Cylinder #2 is the the second spark plug counting from the right to left.
EX.Below are spark plug on engine
engine
-------------------------------
' (oil cap) '
' (4) (3) (2) (1) '
'_________________'

Your misfire can be cause by couple of things but the cheapest way that you can try to fix your car is to do a tune up by replacing:
1)all spark plugs
2)do a oil change
3)spark plug wires
3)distributor cap and rotor

note misfire can be cause by:
1.bad gas
2.spark plug and/or wire
3.distributor cap and/or rotor
4.valve adjustment
5.injector
6.off timing
7.ECM
8.bad wiring(power, ground or feed line)

Jul 08, 2011 | 1998 Honda Accord

1 Answer

'86 honda accord 4 cyl...runs very rough as though missing on 1 cyl ...when removing plug wires 1 at a time each 1 removed makes engine run worse except for #1 cyl which when removed smooths engine out...


no, the plug is firing. But the timing is off. the plug is firing quite a bit before top dead center on that cylinder. The burning of the fuel mixture is occurring while that piston is on its way up and is slowing it down---dragging down the whole engine. i think you should change the distributor cap and rotor as cylinder one is firing at the same time as cylinder 2or 4. This indicates a possible carbon track in the distributor cap.

Feb 12, 2011 | 1986 Honda Accord

1 Answer

I hv a Honda accord 94. It was running great but yesterday it start creating problem. Wen I try to push gas pedal it start missing n rpm needle goes upto 5000. I thought it could be coz of spark plugs so...


Hi,
Looks like some engine oil goes into the cylinder and contaminate your spark plug, thus making your plugs miss.
Look where that oil damp spark plug located at cylinder number, in that cylinder the valve seal is to be replace immediately. Valve seal is located on top of the engine that seals the intake/exhaust valve and valve guide, from oil going in the cylinder.
You could ask your mechanic to do the job, it is a bit hard to replace it. the parts needed coat just under $5.
Hope that helps you out!
Thanks for using Fixya!

Dec 12, 2010 | 1994 Honda Accord

2 Answers

93 honda accord engine no fire cylinder 1


Check timing belt,sounds like belt may have skipped.

Jul 28, 2009 | 1993 Honda Accord

1 Answer

Honda Accord one cylinder not firing


The cylinder is not getting fuel, spark or compression. You have already checked for spark on that cable and it appears to be good. Pull the spark plug and see if it is damaged. You can also switch spark plug and cable to another cylinder and see if the miss travels with the plug and or cable. If so, you'll know its the spark plug/cable that is bad.

You can check for fuel by listening to the fuel injector to see if it clicks. Use an automotive stethoscope or a long screwdriver--put the metal end of the screwdriver on the injector and the other end against your ear and listen to the injector while the engine is cranking or running. You should hear it click for each time it pulses fuel.

If both fuel and spark are good, then you are probably missing compression in that cylinder. You (or a mechanic) will need to pull all the spark plugs and do a engine compression test with a compression test/gage set. Lots of things can lead to poor or zero compression including: broken piston rings, burned/stuck/broken valves, cracked cylinder head or engine block, cracked pistons,etc.

Because one cylinder is "dead", the engine has to work extra hard to start and run against a cylinder that is dragging it down. If you find low/no compression in that cylinder, you will probably have to remove the cylinder head to correct it. A big expensive job. It may be cost effective to replace the whole engine with a rebuilt one.

Apr 04, 2009 | 1997 Honda Accord

1 Answer

Winterize a 2004 4-stroke Honda Aquatrax F-12


i put oil in mine and i do not even start it and in a day its low on oil and theres no oil leeks in the compartment.

Jul 07, 2008 | 2004 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

13614 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...