Question about 2009 Saturn Aura XR

1 Answer

Flush radiator How to flush and fill radiator

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

To flush your radiator. Find where the two hoses go into the firewall in your engine compartment and disconnect them.Next, take off your radiator cap and open the drain valve located on the bottom left side of you radiator.Using a garden hose with a sprayer attachment,spray water into one of the hoses from off of your firewall.This will flush out your entire system till the water comes out clear.If you want to flush out your heater core do the same thing into the hose connections for the heater core.

Posted on Jul 30, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trans fluid ed in coolant bottle did flush and two week brown oily goo in bottle


Flush coolant system again. Do you have a brown sludge in the oil. Do this get Preston coolant flush, drain radiator drain coolant tank, fill radiator with water, add the Preston run vehicle for about 15 min remove lower radiator hose from radiator. This will allow all residue to be removed from engine. Replace radiator hose. Fill radiator with appropriate amount of coolant. Disconnect tank from system and let water run through tank until it is clear. Reconnect tank and you should be good. Unless you have oil and coolant mixed which means a blown head gasket or cracked block

Jun 14, 2017 | Cars & Trucks

2 Answers

HOW TO FLUSH AND RENEW COOLANT?


if the thermostat is in the head at the top radiator hose , remove it an fill the cooling system until the water is at that point --refit the thermostat and continue filling
make sure that the heater is turned on so that any air is moved out of the system

May 30, 2016 | Cars & Trucks

1 Answer

How do I do a proper coolant flush and clean on a 05 Pontiac Montana SV6?


Drain radiator, remove thermostat reconnect housing, fill radiator halfway with water add radiator flush it's by Preston fill up with water start engine run for 20 minutes , drain radiator replace thermostat fill radiator with 50/50 mixture of antifreeze and water run engine and top off radiator as needed

Sep 30, 2015 | Pontiac Cars & Trucks

1 Answer

How to flush radiator system for 1995 chevy g20


just pulling the bottom radiator hose is the best way to flush the system then run water through the radiator till it is clean. also hold your hand over the bottom connection on the radiator while filling it with a hose to flush the engine it comes out of the hose then flushing the engine also.

Apr 05, 2014 | 1995 Chevrolet G20

1 Answer

What is proper method for flushing the radiator and engine in a 1999 Pontiac Montana?


1: Drain coolant system
2: Purchase coolant flush, making sure you have the proper amount for your size of coolant system
3: Pour coolant flush into your radiator, filling the rest with water
4: On the coolant flush bottle it will tell you how long to run your vehicle
5: Once done running, let cool enough to open radiator cap, and drain system COMPLETELY by first draining out of pep **** on radiator, then taking one side of the hoses off the radiator and draining those
6: Put hoses back on and fill system with coolant. When the fluid gets to the top of the fill port on radiator, start vehicle and let run, allowing air to escape the system, and fill as necessary

Oct 27, 2012 | 1999 Pontiac Montana

1 Answer

How to flush/fill radiator 1999 buick regal


there a drain plug on the bottom of the radiator to flush the old coolant put it back the fill radiator hope it helps

Nov 09, 2011 | 1999 Buick Regal

1 Answer

Yes it is normal just no hot air


1. When setting the temperature to MAX, blower level to FULL and outside air Vent CLOSED, no hot air comes out after 2-5 minutes?
If YES, when did you last flushed your radiator and is it full?
2. if more than 5 years ago, flush radiator system, instructions are usually in Owners manual. Use a bottle of Radiator cleaner, run egine hot for about 10-15 minutes, carefully open petcock in bottom of radiator to flush out radiator, WARNING, careful as flushed coolant would be boiling hot. As sson petcock is open and water start to flow out, carefully open radiator cap to enhance flushing flow. Use garden hose to fill radiator while flushing until water coming out from petcock is cold and clear.
Once clear, start engine, turn heter full and blower full blast and keep hose in radiator flowing full, leave petcock open until clear water flows out again. Once clear waters comes out, turn off engine,turn off garden hose and let water drain empty radiator. Once it stops flowing out, close petcock snug and put radiator cap on, pull off radiator coolant catch bottle, clean bottle for any debris and dirt. Drain any water, leave bottle empty and put it back onto its place.
3. Fill radiator with 1 gallon (4L) of concentrated coolant, top up radiator until full, fill catch bottle with concentrated coolant, start engine and keep it overflowing until no bubbles comes out and the radiator is fully hot. Once it is flowing good, close and connect everything. Drive with it and keep catch bottle filled as necessarry.
Good luck. Give as vote and good comment if this advise solve youor problem. Thank you.

Jan 05, 2011 | 2000 Chevrolet Suburban

1 Answer

How do I flush the coolant on a Golf 5 I need to to perform a coolant flush on my 2004 Golf 5. I have the 3 litres of G12 coolant and radiator flush. Is there anything in particular that needs to be done...


take of the top heater hose, use a funnel to insert flushing agent connect hose and flush through.with radiator cap off.take off bottom hose to radiator to drain system,reconnect all hoses,fill expansion tank to fill system...

Feb 11, 2010 | Volkswagen Golf Cars & Trucks

1 Answer

Flush and fill radiator. how do I drain the radiator to flush and fill the coolant. I seem to be having trouble to find the plug enabling me to drain the coolant.


ther is not one/get flush and fill kit from advance auto parts /it comes with info on how to/10 bucks+coolent.
tim

Dec 12, 2009 | 1999 Chevrolet Blazer

Not finding what you are looking for?
2009 Saturn Aura XR Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...