Question about Cars & Trucks
My 2000 buick is missing. the code was p0300. what is that and what is the fix/
P0300 is a random multiple misfire. Could need plugs and wires or a new coil pack. Take it to a qualified mechanic and have them test it.
Posted on Jul 30, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: buick century 2000 wipers
I found the following description on the web, this covers a bunch of the questions I was going to ask...
I own a 2000 Silo and wondered the same thing and do see some GM vans with this problem.
When I bought mine I also bought the Haynes Repair manual (1997 thru 2001 all models GM) #38036 to learn how to fix this and a LOT of other components in/on the van.
For $20 it's worth it.
To answer your question: If the wipers stop at the position they're in when the switch is turned off (Fail to park), disconnect the multi-function switch electrical connector. (This is located under the dash next to the firewall and steering column)
If the wipers now park, replace the multi-function switch. If the wipers still do NOT park, check the wiring from the wiper motor to the switch for a short circuit. If the circuits are good, replace the wiper motor.
Note: There are other adjustments needed for proper operation than just bolting and new motor on.
You can have a look at this manual at any automotive parts supply store.
Posted on Dec 06, 2008
The coolant level sensor is located on the radiator. If you are looking at the engine from the front of the car it will be on the left side. There will some kind of clip holding it in the radiator. Removed the clip and pull the sensor out. You will lose coolant so try to swap it out quick or drain some of the coolant out. Once new sensor is installed, install clip to keep the sensor in place and reconnect the wires to the sensor. Crank the engine and make sure the coolant level is full. This should correct your problem.
Posted on Jan 04, 2009
The cabin air filter for your 2002 Buick Century is located under the
cowl in the firewall between the engine compartment and the passenger
side of the front seat. To change the filter:
1. Leave the wipers in up position.
2. Open the hood
3. Remove the weather stripping from passenger side of cowl
4. Unclip the window washer line (two or three places)
5. Remove the three fasteners with an ordinary screwdriver (one is easy, the other two were more difficult)
6. Take out the cowel cover
7. Remove old filter
8. Put in new filter
9. Replace cover, fasteners, washer line, and weather stripping.
Do it about every 20,000 km. I left mine for nearly 130,000 km and it was filthy dirty.
New filter costs about $12
Posted on May 02, 2009
Sadly no, there is no fuse or bulb to replace. You either have to send the instrument cluster out for repair or replace it with a new unit from the dealer. You could also obtain a serviceable one from a salvage yard. Most shops should be able to replace the instrument cluster or advise who can repair it.
Posted on May 08, 2009
Tips for a great answer:
Nov 04, 2015 | 2000 Buick LeSabre Custom
Aug 03, 2012 | 2000 Buick Century
Apr 03, 2012 | 2000 Buick Century
Jan 06, 2010 | 2002 Buick Century
Jan 04, 2010 | 2000 Buick Century
Oct 17, 2009 | 2000 Buick Century
236 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: