Question about Cars & Trucks

Open Question

Tl 130 takeuchi

Won't change from low to high when hot

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mlapres
  • 757 Answers

SOURCE: I have a 2002 Buick

You have a bad electrical connection. Check the wiring harness and both sides of it's connectors for corrosion and or breakage. The connector terminals will become worn and corroded and the wiring sheaths a prone to weathering and become brittle. Replace or clean as needed.

Posted on Sep 04, 2011

johnjohn2
  • 5763 Answers

SOURCE: 1996 acura tl will crank but won't start

There are many things that will cause a no start, you will need to check for spark and fuel pressure,

Posted on Aug 27, 2012

  • 53 Answers

SOURCE: low and high beam fuses clicking & car won't start

Is the battery good?

Posted on Dec 01, 2012

  • 12 Answers

SOURCE: My low beam headlights won't work but high beams work fine. I changed the bulbs and it still doesn't work

High beam switch moat likely, have you checked relays and fuses?

Posted on Mar 28, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my takeuchi backhoe not start when it is hot?


Jims excavator #30 Part two of my starter installation on my ...

? 13:50
www.youtube.com/watch?v=EoEMoBb1bPU
Jan 12, 2012 - Uploaded by JimsEquipmentShed
This is the second time I've put this starter in, so this time around, instead of removing the rops and ... Thanks! i have a problemwith the heating in de cab. ... B-) The Takeuchi is a great machine though, I'd buy another one.

Aug 05, 2015 | Cars & Trucks

1 Answer

1996 acura tl will crank but won't start


There are many things that will cause a no start, you will need to check for spark and fuel pressure,

Aug 27, 2012 | 1996 Acura TL Series

1 Answer

My 2006 Acura TL trunk light won't stay on when


Hi Drastic, Take out the switch and clean it. I think you have a poor grounding connection. Regards John

Apr 25, 2012 | 2006 Acura TL

1 Answer

Trans won't change from low to normal. fuse?


1995 TOYOTA TRUCK WANT CHANGE INTO HIGH GEAR

Mar 31, 2012 | 1995 Toyota Camry

1 Answer

I have a 2002 Buick Rendevzeous. Sometimes the driver side low beam works, sometimes it doesn't. When it doesn't, the turn signal won't blink. It just stays dimmly lit. Right now, the low beam...


You have a bad electrical connection. Check the wiring harness and both sides of it's connectors for corrosion and or breakage. The connector terminals will become worn and corroded and the wiring sheaths a prone to weathering and become brittle. Replace or clean as needed.

Sep 04, 2011 | 2002 Buick Rendezvous

1 Answer

My exterior low beam lights won't come on and I have changed them.


Check for voltage at the plug in the back of lights...
If you have voltage, its the bulb.
If you don't have voltage...then check the fuses.
GM has low beam and high beam fuses.

Hope this helps...

Aug 13, 2011 | 2002 GMC Envoy XL

2 Answers

2006 Acura TL Air Conditioning Problems


you really need a manifold guage set. this will let you see the pressure levels for the high and low side. you could have overcharged the system which will cause many problems. you may have a problem with a pressure switch. some cars have a shut off for low pressure and high pressure. if you overcharged it the pressure will be too high and could explain some of this. i've not seen the compressor respond to the fan switch before. is the compressor locking up and you smell the serpentine belts burning on the ac pulley? the condensation coming out under the car will change depending on if the compressor is running and how hot it is outside. not really an indication of anything else. get back with me i work on ac systems and would like to help. good luck

May 24, 2010 | 2006 Acura TL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...