Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have to drop the fuel tank. It is inside. Hope the tank is near empty, remove the 2 fuel fill hoses, you have two straps, lower tank, remove 3 wire connectors, and several more lines. Please use an ac delco fuel pump module. It may come updated with a new wiring connector to fix the old ones problem. If it does, you have to rewire the van following the directions.
Posted on Mar 27, 2009
SOURCE: firing order for 97 chevy blazer
Firing order is 1-6-5-4-3-2. Distributor cap should be numbered. Number one cylinder is front on driver's side (3 and 5 follow on same side). Number 2 is front on passenger's side (followed by 4 and 6).
Posted on Apr 29, 2009
It's behind the panel to the left of the cigarette lighter. You need a Torx 25 screwdriver and another screwdriver for those hex shaped screws, forgot the size.
First unscrew the 2 Torx 25 screws beneath the steering wheel. Then unscrew the rest of those Hex screws on the bottom. The panels overlap, so be prepared for a lot of unscrewing.
You do need to unscrew the middle black panel on the bottom, right beneath the cig lighter. It's held by two Hex shaped screws, one on each side and are hard to unscrew. Also you need to remove your spare change sliding tray to unscrew the last hex looking screw.
Once you pop your panel off, the turn signal flasher is the right one. The Hazard flasher is the left one. You can find a replacement part at Auto zone. It's shaped like a cylinder with TWO prongs on it.
Good luck and hope this helps
Posted on May 02, 2009
SOURCE: fuel pressure regulator
Two places to look...if you have separate injectors for each cylinder then regulator should be at the front end of the fuel rail. If you have throttle body injection it is on the throttle body itself.
Posted on Jul 30, 2009
The starter relay is in the engine compartment close to the battery. Its a black or gray box 4" x 4" and may say relays or nothing at all. Lift the cover and get owners manual for exact location inside the box.
Posted on Dec 02, 2009
Tips for a great answer:
Dec 24, 2014 | 1984 Chevrolet Blazer
Jun 23, 2014 | 1997 Chevrolet Blazer
Jul 29, 2013 | Cars & Trucks
Feb 02, 2013 | 1997 Chevrolet Blazer
Jul 18, 2011 | 1997 Chevrolet Blazer
Mar 31, 2010 | 1997 Chevrolet Blazer
Jan 28, 2010 | 1997 Chevrolet Blazer
Dec 02, 2009 | 1997 Chevrolet Blazer
Jun 27, 2009 | 1997 Chevrolet Blazer
Sep 04, 2008 | 1994 Chevrolet S-10 Blazer
39 people viewed this question
Usually answered in minutes!