Question about Dodge Caliber

Open Question

Replacing blower motor resistor on a dodge caliber

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: locating heater blower motor resistor

the resistor is behind your glove box. open the box and push in the sides to release it and let it hang down...the resistor is right there. I didn't try to replace it, a friend did it, but the part was under $20.

Posted on Feb 01, 2009

Ad
  • 2 Answers

SOURCE: how to replace a blower motor resistor in a 2004 jeep liberty

You have to take the glove box off and it is right behind it, need a #20 Torx to take it replace it. The glove box is the hardest part of the job, I just replaced mine on an 05 Grand Cherokee but it didn't fix it for me, was well worth the $8.60 to try though.

Posted on Apr 06, 2009

motor1258
  • 6674 Answers

SOURCE: replace my blower resistor on my 1999 dodge caravan

Under hood up behind strut tower on firewall on passenger side. You'll see a connector attached to a 1-1/2"x 3" rectangular piece that is inserted inside firewall. Pull it to one side then pull out. You may have to play with it a bit, but it will come. Clips in behind it. If you buy the new one first, you'll see the clips that are on other side of firewall in hole.

Posted on Apr 28, 2009

  • 4 Answers

SOURCE: have to change blower motor resistor where is it located

Located behind glovebox. 2 screws and 2 plugs. very simple

Posted on May 30, 2009

  • 412 Answers

SOURCE: help with location and replacing blower motor resistor

depends on what year van..1996-2000,located in engine compartment just above right strut tower at firewall..2001-2007..located behind glove box

Posted on Jun 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

A//c unit works only on high speed/


blower motor resistor...it cuts power to lower settings...easy fix usually under passenger side glovebox two screws and harness looks like a metal card with plastic bottom...

Jan 28, 2016 | 2004 Dodge Dakota

2 Answers

Where is the heater resistor on a 2005 dodge dakota? Behind glove box?


should be just above the blower motor. You will need to remove the glove box door to gain access.

Dec 12, 2015 | 2005 Dodge Dakota Club

1 Answer

How do you check/ pull the control switch to a heater/ac blower motor on a 2010 Dodge Caliber? I have already replaced the resister.


The failure rate on the controller is rare. If you replaced the resistor and still no fan operation, try supplying direct power and ground to the blower motor terminals to see if the fan operates. If no operation, suspect a bad fan. You can also try slapping the bottom of the fan motor with the fan turned on. Sometimes this will excite the motor and make it work again if in fact the fan is an issue.

Jul 09, 2015 | Dodge Cars & Trucks

1 Answer

I have a 2003 Dodge Dakota the ac blower motor quit working. I found burnt wires up under where the glove box is close to the blower motor. Looks life going to some type of module. How do I fix the blower...


Those wires are likely going to blower resistor. Try replacing the blower resistor, and replace connectors on wires to it from blower motor. You just might get lucky. (blower resistor is what regulates blower speeds)

Jul 16, 2011 | Dodge Dakota Cars & Trucks

2 Answers

How do i fix my 2008 dodge blower motor it is not blowing. when I'm driving i can feel cold air coming out of the vents but it does not actually blow.


most all items are controlled via CAN/OBD2 ECM's.Check Resistor also as this controls fan speeds.Not sure it Blower is now ECM controlled but Their are very few relays on these calibers and most everything is ECU controlled.This seems pretty stupid due to one ECM failure and whole vehicle is useless but It keeps dodge stealerships employed.Would have thought they used several for each system like GM so you can at least still use vehicle one of the many .... ABS/Airbag/Traction Control/Engine/Transmission system fails

Apr 21, 2011 | 2008 Dodge Caliber

1 Answer

I am getting intermittent problems with the blower motor on my 2001 dodge durango. i replaced the blower resistor twice.


You may may need to replace the pigtail plug going to the resistor.They have a tendency of melting a few of the terminals but if you are having repeated resistor failures the blower motor may need replaced as it may be drawing too much amperage causing your resistors to fail.Unplug both the resistor and blower to inspect the plugs for any damaged/melted wiring terminals. Replace as necessary.

Jan 28, 2011 | Dodge Durango Cars & Trucks

3 Answers

The fan doesn't work for the front defroster/heater.


Using a test light, check for power at the blower motor connector. If thereis power there, replace the blower motor. If there is no power there, it could be the blower motor switch or the blower motor resistor. The most common is the blower motor resistor.

Jan 04, 2011 | 2004 Dodge Grand Caravan

1 Answer

Blower motor resistor overheats and fried connector to blower motor on 2001 Grand Caravan. Replaced resistor once new one fried connection. Saw review online that the resistor diode may be the culprit....


You should be replacing the blower motor with the resistors. If your buying the parts from the dealer an experienced parts person will insist you replace both at the same time. The blower motor is usually what burns out the resistors.

Jun 05, 2010 | 2001 Dodge Grand Caravan

3 Answers

Heater blower switch broken


mine was doing the same, then just quit all together. I went and got a resistor and everything is working again. Pretty easy to replace as well.

Dec 29, 2008 | 2001 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

596 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...