Question about 2009 Buick Enclave CXL

Open Question

2009 Buick Enclave Park Brake Light Comes on and Chimes While Driving

Park Brake Warning Light comes on and chimes while driving, can stop and apply park brake and release and will stop temporarily, but drive further and it repeats same thing over and over.

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 184 Answers

SOURCE: 1995 Buick Park Ave. Brake light remains ON and chimes on driving

The problem is the car think the park brake is on (intermittently). I would check the park brake switch, perhaps it's loose, or perhaps the park brake is pushed down to the first "click" spot. Also check the wiring connection to the switch, and the wiring nearby. Good luck!

Posted on Dec 14, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2009 Buick enclave and the stabilitrak light comes on when driving and the double brake symbol and slippery when wet the car functions fine


Most common issue is wheel speed sensor bad or reading poorly because wheel bearing is worn. GOOD scan tool will read ABS codes and tell you which wheel.

Sep 08, 2016 | 2009 Buick Enclave

1 Answer

Saturn Vue 07 brake system warning light stays on and chimes intermittently--EB in off position


Check the warning sensor adjustment as the eb system may be worn enough to set it off if the adjustment is too close.

Feb 15, 2014 | Cars & Trucks

1 Answer

2003 yucon xl Parkin brake light wont go off when I drive it the warning chimes are on all the time took it to a brake shop siad it was elec problem need to know where the fuse is to turn warning chimes...


Usually it is a switch on the park brake assembly, if you look at the assembly, the switch is either out of adjustment, out of place, disconnected, or has failed.
Should be an easy fix.

Fuse would not just turn off chimes, other items would also be affected.

Mar 29, 2010 | 2003 GMC Yukon XL

1 Answer

My break light lights up, and then chimes. Does


no i dont think that car has a lamp out warning
check the brake fluid level
also parking brake switch ma be stuck or park brake partially down. try pulling brake release and pulling up pedal with foot

Mar 25, 2010 | 1998 Plymouth Voyager

1 Answer

I have a 1999 Olds Intrigue, headlight left on alarm is stuck


The Body Control Module (BCM) controls the audible warnings. Refer to Body Control System Description in Body Control System for more information regarding the BCM.
The body control module (BCM) controls these reminders:
• Key in ignition reminder: An audible warning intended to remind the driver that the key has been left in the ignition cylinder. The BCM sounds the chime for this reminder at a rate of 150 chimes per minute.
• Fasten seat belt reminder: An audible warning intended to remind the driver at the beginning of the driving cycle that the driver's seat belt is unfastened. The BCM sounds the chime for this reminder at a rate of 50 chimes per minute.
• Fasten belts indicator control: A visual warning intended to remind the driver that the driver's seat belt is unfastened.
• Parking brake reminder: An audible warning intended to remind the driver that the parking brake has been left applied with the transaxle shifted out of PARK. The BCM sounds the chime for his reminder at a rate of 200 chimes per minute.
• Turn signal reminder:
An audible warning intended to remind the driver that the turn signal has been left on while the vehicle has traveled over 1.2 km (¾ mile). The BCM sounds the chime for this reminder at a variable rate (in unison with the turn lamps on) of 90 chimes per minute.
• Headlamps ON reminder: An audible waring intended to remind the driver that the headlamps have been left on. The BCM sounds the chime for this reminder at a rate of 200 chimes per minute.
• Last door closed locking confirmation: An audible warning intended to provide the driver feedback that the last door closed locking feature is active. The BCM sounds the chime for this remainder at a rate of 200 chimes per minute.
• Feature customization and diagnostics feedback: An audible feedback used when changing feature customization modes. Also used by service technicians during the BCM diagnostics. The BCM sounds the chime during the feature customization, and also during diagnostics. Refer to Body Control Module (BCM) for additional information.

Step
Action
Value(s)
Yes
No
1
Was the BCM diagnostic system check performed?
--
YES - Go to Step 2
NO - Go to Diagnostic System Check - Body Control System in Body Control System
2
Check for Powertrain Control Module (PCM) Diagnostic Trouble Codes (DTCs). Refer to Powertrain On Board Diagnostic (OBD) System Check (LX5) or Powertrain On Board Diagnostic (OBD) System Check (L36) in Engine Controls for more information.
Are there any PCM DTCs present?
--
Go to Appropriate DTC Table in Engine Controls
Go to Step 3
3
Connect a scan tool to the Data Link Connector (DLC).
Using scan tool, select BCM data display inputs and monitor the park brake switch input.
While observing the scan tool, apply and then release the park brake.
Does the scan tool indicate that the park brake input is off while the park brake is released?
--
Go to Step 7
Go to Step 4
4
Turn the ignition switch off.
Disconnect the scan tool from the DLC.
Disconnect the BCM connector C1.
Release the park brake.
Using a test light, connect between B+ and the BCM connector C1 terminal D5.
Is the test light off?
--
Go to Step 7
Go to Step 5

Your best bet ,take it to a qualified repair shop

Aug 01, 2017 | 1998 Chevrolet S-10 Pickup

1 Answer

Brake indicator light stays on


Hi the RED BRAKE LIGHT is also for low brake fluid
check the brake fluid level in most cases if the brake fluid is low you need the brakes replaced

May 08, 2009 | 1999 Buick LeSabre

2 Answers

1995 Buick Park Ave. Brake light remains ON and chimes on driving


The problem is the car think the park brake is on (intermittently). I would check the park brake switch, perhaps it's loose, or perhaps the park brake is pushed down to the first "click" spot. Also check the wiring connection to the switch, and the wiring nearby. Good luck!

Dec 13, 2008 | 1995 Buick Park Avenue

Not finding what you are looking for?
2009 Buick Enclave CXL Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...