Question about 1992 Mitsubishi Galant
Runs but when you push the gas it dies? what the problem
Check and make sure the air intake hose to the engine is not loose, also remove it and bend it and look for cracks, most of the time these occur on the bottom of the hose. The excess air entering the engine starves the engine for fuel and causes the stall out when the engine rocks back as you apply power..
Posted on Jul 29, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You can try to find one in a junkyard, but may have no luck. You can also contact the dealer, they may be able to get one for you. Here is a link for a site that sells all types of manuals, they should be able to help you out.
Posted on Nov 16, 2009
SOURCE: My 2003 Mitsubishi Galant (V6)
It is your idle air control (IAC) motor. Its located on the bottom of the throttlebody. All you need to do to change it out is remove the air intake hose from the throttlebody, unplug the connector and remove 3 screws. But the part isn't cheap. I would suggest finding on online because at a local parts store it will be around $250
Posted on Oct 01, 2010
All Mitsubishi cars pretty much hide the water pump under the timing belt. You should buy all new belts for the car and consider replacing the water pump at the same time.You will have to take off the power steering belt, the alternator belt, the upper belt cover, support the motor, take off the motor mount, jack up the right front corner of the car, take off the front right tire, take off the engine plastic under cover, line up the TDC timing mark, Take off the front wheel ,take off the plastic splash cover, using an air wrench take off the lower pulleys, take off the lower engine cover, observe the timing marks/arrows and highlight with paint (on the crankshaft,counter balancer shaft , and cam shaft),take off the timing belt, counter balancer belt if there is one, water pump belt, and now you can unbolt the water pump, scrape the gasket, and replace it. Now the good news, if you have tools,a compressor, an air gun(for lower pulley bolt), patience , and four to eight hours to kill, you can actually do it your self.
Posted on Nov 12, 2010
Tips for a great answer:
Nov 27, 2012 | 2000 Mitsubishi Galant
Oct 19, 2012 | 1992 Mitsubishi Galant
Oct 01, 2010 | 2003 Mitsubishi Galant
Sep 26, 2009 | 2000 Mitsubishi Galant
Jun 28, 2009 | 1992 Mitsubishi Galant
Nov 19, 2008 | 1998 Mitsubishi Galant
62 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: