Question about Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
put the back of car on jack stands and secure the front tires so it does not roll and then remove the bolts off the back of the caliper there is normally two one at top and one at bottom and spray it with some kind of oil for rust and make sure you have the right size socket before you try to loosen them and once caliper is off and the old pads removed take one of the old pads and squeeze the piston on the caliper back in by using a "C" clamp and also remove some of the brake fluid from the master cylinder before you do this put the new ones back on and check the brake fluid and make sure it is full and then pump the brakes to make sure you have a good pedal also put some "No Squeak" brake stop on the back of the pads so they don't squeak they will have that where you buy the pads from
Posted on Mar 01, 2009
brake pedal switch, get a wire, unplug plug, bridge circuit and check lights.
plug and switch is high up on the brake pedal not normally easy to get to.
Posted on Aug 15, 2009
Hello. I can assist you. Most likely, your door latch is broken and will need to be replaced. Historically these were metal and rusted due to exposure, soooooo now they are plastic and after a few hundred uses, they break. You can purchase the tailgate handle and replace it yourself but my recommendation is to let the shop do it as it can be a little tricky and often the linkage rods also need to be cleaned and lubricated. The total cost of this repair is generally about $75. Thanks for choosing Fixya!
Posted on Nov 13, 2009
Both of my brakelights have gone out on my 2005 jeep liberty. The problem is the brakelight socket. I bought replacement socket from the dealership for about $8 each. They are wireless and easy to replace. They sit on a circuit monted to the back of the tailight. The dealership will need your vin # as there are different types of sockets for the liberty.
Posted on Jan 09, 2010
Tips for a great answer:
Jun 09, 2014 | 2006 Jeep Liberty
Dec 14, 2013 | 2005 Jeep Liberty
Feb 18, 2013 | 2006 Jeep Liberty
May 27, 2011 | 2009 Jeep Liberty
Aug 12, 2009 | 2005 Jeep Liberty
Apr 04, 2009 | 2002 Jeep Liberty
Jan 19, 2009 | 2005 Jeep Liberty
Nov 19, 2008 | 1996 Jeep Grand Cherokee
Nov 16, 2008 | 2002 Jeep Liberty
96 people viewed this question
Usually answered in minutes!