Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: head bolts torque settings
According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.
Posted on Feb 07, 2009
SOURCE: Angle Torque settings head bolts
Use new bolts, tighten in the following stages
3. wait 3 mins
4. slacken bolts 1&2 retighten to 20Nm +110 degrees
5. carry out stage 4 for bolts 3,4,5 & 6
then bolts 7,8,9 &10
8 4 1 5 9
7 3 2 6 10
Bolts 9 & 10 are flywheel side of the engine.
Posted on Mar 17, 2009
SOURCE: Blown head gasket
i think you are reffering to a 4D56 engine. just type 4D56 workshop manual .pdf download on your browser and you fill find several free downloads. everything you need to overhaul the engine is there
Posted on Jun 02, 2009
Tips for a great answer:
Mar 19, 2016 | Tata Cars & Trucks
Feb 19, 2015 | 2006 Tata Indica LSi
Apr 04, 2014 | 2006 Tata Indica LSi
Oct 31, 2013 | Cars & Trucks
Apr 20, 2013 | 2006 Tata Indica LXi
Apr 01, 2013 | 2006 Tata Indica LSi
May 24, 2012 | Tata Indica Cars & Trucks
14 people viewed this question
Usually answered in minutes!