Question about Cars & Trucks

Open Question

Cylinder head bolt torque settings 2007 tata indica diesel

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: head bolts torque settings

According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Posted on Feb 07, 2009

  • 1 Answer

SOURCE: Angle Torque settings head bolts

Use new bolts, tighten in the following stages 1. 20Nm 2. 100Nm 3. wait 3 mins 4. slacken bolts 1&2 retighten to 20Nm +110 degrees 5. carry out stage 4 for bolts 3,4,5 & 6 then bolts 7,8,9 &10 Sequence, 8 4 1 5 9 7 3 2 6 10 Bolts 9 & 10 are flywheel side of the engine.

Posted on Mar 17, 2009

junmag
  • 175 Answers

SOURCE: Blown head gasket

i think you are reffering to a 4D56 engine. just type 4D56 workshop manual .pdf download on your browser and you fill find several free downloads. everything you need to overhaul the engine is there

Posted on Jun 02, 2009

inspectmycar
  • 233 Answers

SOURCE: 94 mazda B3000 3.0L cylinder head torque specs

Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below
aca9f77.gif

Posted on Sep 17, 2009

  • 1 Answer

SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2

Posted on Jan 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is torque settings for head bolts on Kia pregio 2001


What are the cylinder head torque settings for a KIA K2700

www.answers.com > ... > Categories > Cars & Vehicles > Asian Cars > Kia
What is the torque specification for the cylinder head on a 2002 Kia Sportage? ... the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs. ... Thehead bolt torque settings, on your Kia 2.7 diesel engine, is 70 pounds per ...

Aug 17, 2015 | Kia Cars & Trucks

2 Answers

Engine specs mains big ends and cylinder head please


The Chilton and Haynes manuals are your best bet. Order it at your local Autozone or goto the Library and research them online fro free.

Feb 19, 2015 | 2006 Tata Indica LSi

1 Answer

Indica valve settings lse


Head torque is 49nm and then 90 degress dont know the valve settings

Sep 18, 2014 | 2006 Tata Indica LSi

1 Answer

What is tata indica lsi 1.4 cylinder torque settings?


Torque settings for a TDI DLX is (in nm) 29+49 minus 90 degrees +64nm. Hope this is helpful.

Jul 22, 2014 | Tata Indica Cars & Trucks

1 Answer

Tata indica Timing marks


On. An Indica petroll or diesel there aren't aany timing marks as to say, firstly remove cylinder head, then attach a power bar or ratchet with socket to to bolt on crank shaft pulley. Rotate the engine anti-clockwise until piston one is at TDC (highest point it can go). Then at Te front of engine halfway down the block where engine meets bell housing there is a hole to. Insert a 8mm long bolt, this will lock the crankshaft. On the head on the cam shaft end cap is a hole, insert a screwdriver to fit and rotate cam with. A ratchet until the screwdriver slots in place and the cam cannot move. Replace the head, torque the bolts, fit the timing belt and tension it. Once this is done remove the locking bolt and screwdriver, Replace the cam-tappet. Cover and start the engine

Apr 04, 2014 | 2006 Tata Indica LSi

2 Answers

Please assist with Cylinder Head Torque and Valve Clearance Specs for Tata Indica 1.4 LXi


i need the head talk settings & valve clearance for tata indica lxi

Apr 20, 2013 | 2006 Tata Indica LXi

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...