Question about Cars & Trucks

Open Question

Ford falcon ba wagon how do you remove globes from tail light assembly

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: cannot remove tail light assembly

I had the HARDEST time with the lights...I never realized changing a bulb would be so difficult. Once you unscrew what you need to, go into the trunk and pull the lining away from the back part of the light. There are the white prongs that you will need to tap with a hammer until they pop out and then the light assembly will come out. Be careful though, I got a little too impatient and broke mine. I used a binding agent to hold it back in place though...GOOD LUCK!

Posted on Nov 29, 2008

Ad
  • 1 Answer

SOURCE: BA Falcon airconditioner outlet

it a blocked drain pipe for the ac. drain pip is located on the firewall on top of the transmission converter housing. jack up the car and pry out the stupid yellow plastic cover ford put on the pipe. the plastic cover causes the blockage. You should be all good to go no more leaks

Posted on Jul 03, 2009

  • 12 Answers

SOURCE: How to Remove the Rear Bumper - BA Fairmont/Falcon

Firstly, you need to remove the rear splash shields from within the rear wheel arches and also the tail lights. Then remove the scrivets from the lover edge of the bar. Next remove the scuff plate at the boot opening and fold the carpet back. There are four nuts which hold the bar on, undo these and then lift the sides of the bar up and pull out. The bar has large clips on the side which hold it in place.

Posted on Aug 22, 2009

  • 24 Answers

SOURCE: need a diagram to change rear wheel bearings

if you are looking for a manual for this car, try this link... http://cgi.ebay.ph/Ford-Falcon-Ute-BA-series-Repair-Manual-2002-2005-on-CD_W0QQitemZ170423275380QQcmdZViewItemQQptZAU_Clothing_Merchandise_Media?hash=item27ae04cf74 For twenty bucks you can do it all yourself

Posted on Feb 05, 2010

  • 1 Answer

SOURCE: ba falcon heater

Just had the same thing happen to my BA. No hot air. I'm a bit of a handyman so I had a go myself. 8 Hours is a reasonable estimate. You have to remove the steering column and entire dashboard to get the bugger out. Not a job I would attempt again.

Posted on May 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a drivers side mirror assembly on a BA Falcon XR8?


John, We do not have this model in North America. I did a search and will put links below. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.fordmods.com/ford-interior-f14/how-to-remove-the-right-side-mirror-of-a-ba-t73777.html
fordforums com au
2010 Ford Falcon FG FPV F6 Front Left Door Removal

Jul 03, 2016 | Cars & Trucks

1 Answer

How to remove rear axle from 2004 ba ford falcon


Hi there.
Well first jack up the rear end of car then block up the front wheels (front and rear) and put stands under the rear jacking points STILL keeping the pressure on the jack, clamp the rear brake pipe that comes from the body to the rear axle and clamp with a small clamp
but dont tighten to tight remove the flex pipe and also the rear shockers from the axle ,then the spring u bolts and then the hand brake cable from the center adjuster,now it should only leave your tail shaft 4 nuts/bolts.
But why are you removing the rear/axle????

May 04, 2014 | 2005 Ford Falcon

1 Answer

Autogear box leaking form front ford falcon ba wagon


It is not a do it yourself task because the transmission has to be removed from the car
You need to take the car to a transmission specialist.

Dec 26, 2012 | Cars & Trucks

1 Answer

Why wont the brake lights shine when pressing the brake pedal but the tail lights are working on the same bulb


test the brake light switch located at the brake pedal, disconect the switch & bridge the wires, turn ignition on if you have lights its a faulty switch (very common on ford falcons) if not check you have power at that plug, if power check the globes cause you could have blown globes as they are twin filiment globes (1 globe but 2 lights tail & brake) & the brake filiments might be blown.

Jun 26, 2012 | Ford Expedition Cars & Trucks

1 Answer

02 Focus Wagon - Rear tail light/brake light keeps blowing bulbs. Bulb is white when removed, replacement bulb last about a week, then blows again. Any idea what the problem may be.


If a bulb blows white the gas mix in the globe is incorrect and you probably got hold of a bad batch of globes from your supplier. Try buying your bulbs from another source and see if that works out better.

Mar 21, 2011 | 2002 Ford SVT Focus

1 Answer

How do you replace rear tail lights on 1998 EL For Falcon Futura wagon


Below is a generic guide to replacing the tail lights on a vehicle. Refer to your user's manual for specifics on location. http://www.automd.com/518/how-to-replace-a-tail-light/

Mar 21, 2011 | 2005 Ford Futura

1 Answer

Have BA Ford Falcon with tail lights that are extra bright. All of them. No discerable difference when foot is placed on the foot brake. I suspect an extra ground to the lights but am puzzled by the...


sounds as though the brake light switch is stuck it's down behind the brake pedal arm try removing it and cleaning around the plunger where it goes into the switch also look at and see if the plunger has became bent from years of use you may need to just replace the switch.

Dec 28, 2009 | Ford Fairmont Cars & Trucks

1 Answer

How to Remove the Rear Bumper - BA Fairmont/Falcon


Firstly, you need to remove the rear splash shields from within the rear wheel arches and also the tail lights. Then remove the scrivets from the lover edge of the bar. Next remove the scuff plate at the boot opening and fold the carpet back. There are four nuts which hold the bar on, undo these and then lift the sides of the bar up and pull out. The bar has large clips on the side which hold it in place.

Aug 04, 2009 | Ford Fairmont Cars & Trucks

1 Answer

Stop light bulb replace


Believe it or not, for the Taurus wagon, Ford wants you to take it in to the shop. The Taurus wagon tail light assembly is really a stupid design. I will do my best to describe it here. You must remove the two phillip screws on the tailight assembly, seen when you have the hatch door up. The trick is the assembly is still held with a hinge type, snap in deal that holds the front part of the assembly tight to the body side. You might be able to see or access it from inside the spare tire cover or the access door on the passenger side. Being oh so careful to release the clip so you can pull the assembly free to change the bulb. Hope this is some help.

The tail lamp / break lamp uses bulb number 3157.

May 02, 2009 | Ford Taurus Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...