Question about Cars & Trucks

Open Question

Hyundai h100 bakkie .brake/clutch fluid dripping on driver side floor when use the clutch.wher must I look and what is wrong?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 179 Answers

SOURCE: In a 2000 Hyundai accent, clutch fluid = brake fluid

Yes that is correct. it should say what type right on the lid. example dot 3 or dot 4.

Posted on Jul 06, 2009

Ad
  • 2 Answers

SOURCE: Frequent clutch changes on Hyundai H100 Pickups

I own H100 is at 121000 km now I have never changed clutch.I agree with the dealer when they say the driver sometimes are little bit harsh on vehicles

Posted on Oct 12, 2009

joshnaz
  • 186 Answers

SOURCE: the clutch is to the floor in my hyundai elantra

The fluid resivor is a small bowl with a cap on it on the drivers side under the hood near the brake master cylinder. If there is no fluid in it the clutch may be worn out and needs to be replaced. Also if you fill the resivor you may need to bleed the system. Fill the resivoir with normal brake fluid (DOT 3) them locate the bleeder screw on the slave cylinder bolted to the transmission. I have pictures for you of the Clutch master cylinder (where the fluid goes) and the slave cylinder where you bleed it.

27172ef.gif

Posted on Mar 04, 2010

  • 3 Answers

SOURCE: Can I use brake and clutch fluid to topup

they may look similar but u should use the proper fluid or risk damage

Posted on May 25, 2012

  • 51 Answers

SOURCE: how to fix master clutch on Hyundai H100 truck

if the reservoir is not cracked almost all the leaks at fittings can be stopped by gently tightening them or by draining the reservoir. And opening the fitting that is leaking and replacing the ferrule. Reassemble refill and check for leaks. If the shaft is leaking you may be able to buy a rebuild kit. If not you have to replace the whole thing.

Posted on Jul 11, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the clutch master cylinder on hyundai h100 located


this is the part
looks like its attached to the clutch pedal and has a booster close by


2 5L 41600 4F000 Clutch Master Cylinder HYUNDAI H100 PORTERII
26247239-p5duyrbkgvrt24iigb1f3ivd-3-0.jpg

26247239-p5duyrbkgvrt24iigb1f3ivd-3-2.jpg

Jul 28, 2016 | Hyundai Cars & Trucks

1 Answer

Does anyone know where i can get a crank shaft for a hyundai h100 2.6 the bakkie with the round head lights. Annelize


wreckers , spare parts at service dealer, engine reconditioner engineering shops
get yours ground

Apr 28, 2016 | Hyundai Cars & Trucks

1 Answer

I have a 2002 Hyundai elantra my clutch is stuck wat do I do


Stuck? Do you mean the clutch pedal is sitting on the floor and won't come up?If so, pull the pedal up with your hand and check the fluid level in the clutch master cylinder as it may be low/empty and fill as required with brake fluid. You may have to bleed the system in order to get the clutch working properly again

Feb 15, 2016 | Hyundai Cars & Trucks

1 Answer

The clutch is to the floor in my hyundai elantra 2000, where do i put the fluid in, nothing is marked.


The fluid resivor is a small bowl with a cap on it on the drivers side under the hood near the brake master cylinder. If there is no fluid in it the clutch may be worn out and needs to be replaced. Also if you fill the resivor you may need to bleed the system. Fill the resivoir with normal brake fluid (DOT 3) them locate the bleeder screw on the slave cylinder bolted to the transmission. I have pictures for you of the Clutch master cylinder (where the fluid goes) and the slave cylinder where you bleed it.

27172ef.gif

Mar 04, 2010 | 2000 Hyundai Elantra

2 Answers

Where do i find the oil level for my clutch for a 2003 hyundai tiburon


Almost all newer vehicles have a Clutch master cylinder.
It looks like a small brake resevoir. It will be under the hood and have a cover on it. It takes brake fluid, and will tell you what kind on the lid.
It should have a low and high level line on it. (The level will get low as the clutch wears)

Nov 24, 2009 | 2003 Hyundai Tiburon

3 Answers

In a 2000 Hyundai accent, clutch fluid = brake fluid


Yes that is correct. it should say what type right on the lid. example dot 3 or dot 4.

Jul 06, 2009 | 1999 Hyundai Accent

1 Answer

Frequent clutch changes on Hyundai H100 Pickups


I own H100 is at 121000 km now I have never changed clutch.I agree with the dealer when they say the driver sometimes are little bit harsh on vehicles

Mar 23, 2009 | 2008 Hyundai Tucson

1 Answer

Clutch pedal low near floor, can the clutch be adjusted?


hi the clutch on accent is hydraulic operation so if pedal is very low on disengaging clutch ? you may have a problem with the hydraulics 1st thing to check is fluid level? this is the reservoir that feeds both brakes and clutch but is seperaterated inside if fluid low? top up and bleed the slave cyl however if fluid low indicates a leak ? possibly slave cyl? if no loss of fluid ? then prob may be fault in the master cyl ? check fluid come back with any update please ps if this problem has just occured? check for leaks ?

Feb 02, 2009 | 2005 Hyundai Accent

2 Answers

Thermostat in a 1997 hyundai elantra


See exploded view
0d68e80.gif

REMOVAL
1. Drain the coolant down to thermostat level or below. 2. Remove the coolant outlet fitting and gasket. 3. Remove the thermostat

Jun 22, 2008 | 1997 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...