Dust Cover Removal transmission chevy s10 - 1984 Chevrolet S-10

I tried the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my ford explorer. it wont move forward or
reverse, engine is good both solenoids for forward and reverse work.
I don't have much technical knowledge but I just followed it step-wise, and works perfect! got it from www.reliable-store.com

This 4.3 V6 is just a 350 V8 with 2 cylinders missing and even a V8 trans will fit/interchange physically being the same bolt pattern and size. If it's the same shift pattern and both transmissions are overdrive transmissions, yes, it will interchange. If it's GM, it'll swap. From 1988 the automatic transmissions have a multi bolt pattern and Pontiac, Caddy, Olds and Chevy, all will bolt up.

didnt specify if manual or automatic transmission the following link is the owners manual for an 03 s-10 pages 5-13 and 5-21 to 26 cover how to check either transmission
2003 Chevrolet S10 Pickup Owner Manual

images for How to remove a gear to gear timing cam ...

DIY Timing Chain and Gears Removal - YouTube

? 6:31
https://www.youtube.com/watch?v=eMXO1bvUCMs
Dec 30, 2012 - Uploaded by Bullshitkorner
The most important part when doing timing gears on a engine is ... Doing this inside the engine bay will be a bit of a pain in the axx but it is doable for sure. ... How to build a Chevy 383 Part 3: How To Install a Cam & Timing ...

Head removal & replacement, Timing Chain & gears also ...

? 3:28
https://www.youtube.com/watch?v=CnXtwR1N0Og
Apr 28, 2012 - Uploaded by No1hmfic Gibson
Head removal & replacement, Timing Chain & gears also, 97 Chevy S10 2.2 ... replacing the head gasket in a chevy cavilier 2.2 liter 4 cylinder - Duration: 9:38. ... 98 S10 Vortec V6 4.3 Intake Gasket Replacement Part 1 of 5 ...

Chevy S 10 2.2 L Engine Timing Chain Replacement Guide ...

? 7:30
https://www.youtube.com/watch?v=8nX5HARPSF4

You can get this answer from the guys at your wrecking yard.

Normal 0 To take off and put back the transmission cost around $700 labor. To open up, repair and put things together, parts and labor start at $800. So the total would be at least $1500.
Buying a used Transmission for $300, and replace the bed one for $700, would cost you $1000 at least.
The question is:
Could you find a dissent transmission of a 1986 Chevy S10 4X4.
The answer is:
Chanced are slim or none.

You have to check under the Vehicle and locate the Fluid Check/Fill hole and plug on the Side of the transmission. Check your owners manual for the proper Fluid Type to use.

Hi:

Your transmission has 3 shift rails...
1st - 2nd
3rd -4th
5th- Reverse

If your 3rd gear doesn't work , you have an internal transmission problem, such as a syncronizer, or similar fail... There is not much you can fix, without removeing the transmission.

Have the transmission governor checked

hammer and prybar