Acura mdx 2006 serpentine belt diagram - Cars & Trucks

SOURCE: serpentine belt diagram:

if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach

SOURCE: serpentine belt diagram:

The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.

SOURCE: need belt schematic for 2006 toyota corolla

I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram

SOURCE: 2006 ford taurus serpentine diagram

http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=FORD&model=TAURUS&year=2006&year_from=&year_to=&engine=All&l=n

This should Help. Please Rate My Response! Thanks!

SOURCE: procedure to change serpentine belt 2006 toyota tacoma?

On my 2005 Tacoma with the 4.0L V6, I found it easier to change the belt from under the truck. Just remove the skid pan. Plenty of room to install the belt. The tensioner pulley is the one at about 2-o'clock from the crankshaft with the belt nearly all the way around it.