Question about Cars & Trucks

Open Question

Anti theft light blinking on my acura tsx - Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: anti theft device for 97 ford expedition

I have 2007 expedition XLT and the interior light blinking all the time what the solution ?

Posted on Oct 18, 2008

Ad
  • 3 Answers

SOURCE: 2001 ford taurus wont start and anti-theft light is blinking

Either you may be using a key that you had copied from the original or your chip went bad in your original key. Most of cars now a days have the key censor in the key so if it is the incorrect key it will not start your car or if it does not read that chip it will not start

Posted on Feb 05, 2009

  • 232 Answers

SOURCE: anti theft dash light is blinking on my 1998 rodeo

I'm assuming its an original alarm or system that came from factory or dealer. When the light blinks is because the alarm is activated. Look underneath the radio the alarm brain might be there. There will be a label on it saying alarm or security system etc. Disconnect the harness to it and try operating your vehicle.

Posted on May 06, 2009

junmag
  • 175 Answers

SOURCE: anti theft device for 1997 ford expedition

try using a spare key first

Posted on Jun 02, 2009

  • 1 Answer

SOURCE: oil reset light

how do i reset the oil light on tsx

Posted on Aug 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My acura 2002 MDX does not start nor crank... I see red light is blinking( security system)


you more then likely have an anti theft device, trying putting a flasher on either left or right and try, due all the dash gauges light up when you put the key to the on position? you can try unplugging battery and replugging it, ensure you have the radio code for stock radio before doing so.

Dec 29, 2016 | 2002 Acura MDX

1 Answer

My acura mdx 2006 trip computer radio and charger went black and anti theft light is blinking please help ?


First thing to try is disconnected the battery for 20 min. Then reconnect the battery. It may reset the computer. You will have to re-enter the radio code.

Dec 16, 2016 | Acura MDX Cars & Trucks

1 Answer

Hazard lights not working


tsx console vsa moonroof hazard button guide - YouTube

? 3:00
www.youtube.com/watch?v=b0M0VMWLIFk
Jan 8, 2009 - Uploaded by Jeffrey Liu tsx console vsa moonroof hazard button guide ... Like the RonJonLight :P ... GTA Car Kits - Acura TSX 2004-2008 install of iPhone, iPod and ...

Sep 25, 2015 | 2004 Acura TSX

1 Answer

How to change a starter on a 2004 Acura TSX


Removal

  1. Make sure you have the anti-theft codes for the audio system and the
    navigation system (if equipped), then write down the audio presets.
  2. Disconnect the negative cable from the battery.
  3. Remove the
    intake manifold, '04-05 models,
    '06-08
    models.

  1. Disconnect the starter cable (A) from the B terminal, and disconnect
    the BLK/WHT wire (B) from the starter solenoid S terminal.
  2. Remove the harness clamp (C) and the harness holder (D).

  3. Remove the two bolts holding the starter, then remove the
    starter.
  4. Installation

    1. Install the starter, then connect the starter cable (A) to the B
      terminal, and connect the BLK/WHT wire (B) to the starter solenoid S terminal.
      Make sure the crimped side of the ring terminal faces away from the starter when
      you connect it.
    2. Install the harness holder (C) and the harness clamp (D).
    3. Install the
      intake manifold, '04-05 models,
      '06-08
      models.

    4. Connect the negative cable to the battery.
    5. Start the engine to make sure the starter works properly.

    6. Enter the anti-theft codes for the audio system and the navigation
      system (if equipped), then enter the audio presets. Set the clock (on vehicles
      without navigation).

rjaai003_204.asp?menuid=rdbawh030000&sessionid=b23b61ec-6b2d-41dc-8d50-15026d64c21a&dbkey=sea7a00a46500056901kdad01

Nov 02, 2013 | 2004 Acura TSX

1 Answer

My tsx doesn't start. Tried jumping it off, but it doesn't even turn over. Every third or fourth time I turned the key, it would bump (not really turning over but trying). Not getting the clicking sound...


Hi, this sounds like the starter solenoid, but on your car the solenoid is integrated with the starter motor assembly. You will need to remove the starter and have it tested at your local parts chain.

If you have the proper equipment, you can test at home as indicated below. Please let me know if you have questions, and thanks for using FixYa.

TSX Models

NOTE The factory sound system has a coded theft protection system. It is recommended that you know your reset code before you begin.
  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove or disconnect the following:

    Negative then the positive battery cables Intake manifold Starter cable from the B terminal Black/white wire from the S (solenoid) terminal Harness clamp and holder Two bolts that mount the starter to the transaxle assembly Starter
To install:
  1. Installation is the reverse of the removal procedure.
    NOTE When installing the heavy gauge starter cable, make sure the crimped side of the terminal end is facing out.
  2. Enter the anti-theft code and radio presets.

    Fig. Starter mounting-TSX models

jturcotte_1275.gif

Mar 19, 2011 | 2004 Acura TSX

2 Answers

I have a 04 acura and the lights in the radio clock an heat controls does not work.


ACURA Service Bulletin

04-021


Applies To: 2004 TSX - From VI N JH4CL9...4C000001 thru JH4CL9...4C028982

July 9,2004

Audio-HVAC Display Module Is Dim or Dark

SYMPTOM
The audio display and controls (knobs, buttons, bars)
of the audio-HVAC display module are dim or are dark.

PROBABLE CAUSE
Faulty audio unit.
CORRECTIVE ACTION
Replace the audio unit. Refer to S/B 87-015, Audio Unit
In-Warranty Exchange/Out-of-Warranty Repair.
If a client calls ahead to schedule an appointment, and
the vehicle is in the affected VIN range, order the
remanufactured audio unit right away so it is available
when the client comes in.

PARTS INFORMATION
Order the appropriate replacement audio unit:
NOTE; The audio unit is listed as a Tuner Assembly in
the Interactive Network (/N) Parts Catalog. This unit is
both a tuner and a 6-disc CD changer.
Tuner Assembly (without navigation system):
P/N 39175-SEC-A02RM
Tuner Assembly (with navigation system):
P/N 39175-SEC-A82RM

WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies
Operation Number: 010149
Flat Rate Time: 0.5 hour

Failed Part: Use the RM part number (from the
repair order) without the RM.
Example; 39175-SEC-A01
Defect Code: 03214
Symptom Code: 03272
Skill Level: Repair Technician

Out of warranty: Any repair performed after warranty
expiration may be eligible for goodwill consideration by
the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a
decision, before starlina work.

REPAIR PROCEDURE
1. Go to S/B 87-015, Audio Unit in-Warranty
Exchange/Out-of-Warranty Repair, for guidance on
how to get the remanufactured audio unit.
2. if you can read the audio display, write down your
client's radio station presets.
3. Remove the audio-HVAC display module (see page
22-267 of the 2004 TSX Service Manual). (In ISIS,
use the keyword DIS MOD, and select Audio-
HVAC Display Module Removal/Installation frorn
the list.)
4. Remove the faulty audio unit from the audio- HVAC
display module (see page 22-268). (In ISIS, use the
keyword DIS PAN, and select Audio-HVAC
Display Panel Removal/Installation from the list.)
5. Transfer the left and right brackets from the faulty
audio unit to the remanufactured audio unit. If the
remanufactured unit has a shipping cover and
shipping screws, make sure you transfer them to
the faulty unit being returned.
6. Install the remanufactured audio unit in the audio-
HVAC display module. Then reinstall the audio-
HVAC display module.
7. Enter the anti-theft code for the new audio unit.
Enter your client's radio station presets if you
recorded them in step 2.
8. Make sure all of the functions of the audio unit and
HVAC work properly.

9. Replace the sticker on your customer's anti-theft
radio identification card with one of the new stickers
that show the anti-theft code. Apply the other
sticker that shows the anti-theft code onto the
vehicle history file copy of the repair order.

10. Remove all old serial number stickers from the side
of the glove box or inside the center console. Then
apply the new sticker that shows only the serial
number to the side of the glove box.
11. Return the faulty audio unit to the parts
department. Refer to S/B 87-015 for parts return
in structions

Jan 29, 2010 | 2004 Acura TSX

2 Answers

Radio pin code


Hi,

The anti theft feature has been activated. Disconnect both battery terminasl for some 30 seconds and reconnect the. If after doing this, the radio asks for a CODE, then you need the code now, but if the radio keeps displaying ERROR E the radio is bad.( the radio will never give you any code to unlock it for that purpose you must go to your nearest Acura dealer as they are authorized to retrieved it online from factory)

Jul 24, 2008 | 2006 Acura TSX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...