Question about Hyundai Santa Fe
2007 hyundai santa fe ambient temperature quit working
You will find this either in the air filter housing on in the piping to the manifold.
Posted on Jul 29, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Knock sensor location
Knock Sensor Description addthis_pub = 'car-suff'; A quality Knock Sensor is more important than ever thanks to today’s increasing gas prices. Your Engine Knock Sensor enables your vehicle to obtain the optimum combination of timing and fuel/air mixture to generate power and efficiency and that means less wasted gas. Our guaranteed low prices make us your one-stop Knock Sensor Location. Regardless of the brand, make or model car, truck, van or SUV you drive, we make it easy to locate the application specific Knock Sensor that’s perfect for your vehicle. Our state of the art parts locating system puts you just a few mouse clicks away from the Knock Sensor you need and at a price you cannot beat anywhere. Click. Click. Click. And you are there. In addition to robbing you of fuel economy and performance a faulty Knock Sensor can cause expensive damage to your engine. Remember, the Knock Sensor keeps fuel from detonating in the cylinder … exploding rather than quickly burning as it should. If not replaced a faulty Knock Sensor can quite literally cause hundreds if not thousands of dollars in damage. There is really no need to look any further to find the Knock Sensor that’s application specific for your car, truck, van or SUV – high performance or family vehicle. We’ve got guaranteed low prices and shipping that other suppliers envy. Give us a try, we think you’ll be happy … in fact we guarantee it.
Posted on Jun 20, 2008
hi have not had pleasure of this on santa fe yet? but will try to help dependant of which side o/s or n/s ? i would first remove the screws holding the front of the under engine plastic cover/shield and drop down sufficient to gain view/access? to the rear of fog lamp then if a cover is on? try turning anti clock to remove? or if rubber cover pull off? then the bulb and clip should be visible? unplug the wire from bulb then the spring clip holding bulb in place normally just sring the 2x top ends together and swing down/clear to remove bulb? refit new bulb correctly! pay attention to position old bulb positioned? then clip securely and re connect wire at this stage it would be best to ensure bulb works ?? before you re assemble all else? wish you luck and hope this helps with your problem ?
Posted on Oct 28, 2008
crank sensor is a component used in an internal combustion engine to monitor the position or rotational speed of the crankshaft. This information is used by engine management systems to control ignition system timing and other engine parameters. Before electronic crank sensors were available, the distributor would have to be manually adjusted to a timing mark on the engine.
The crank sensor can be used in combination with a similar camshaft position sensor to monitor the relationship between the pistons and valves in the engine, which is particularly important in engines with variable valve timing. It is also commonly the primary source for the measurement of engine speed in revolutions per minute.
Crank sensors in engines are usually comprised of magnets and an inductive coil. They are principally based on the Hall effect. Common mounting locations include the main crank pulley, the flywheel, or occasionally on the crankshaft itself.
Some engines, such as GM's Premium V family utilise crank position sensors which read a reluctor ring integral to the Harmonic Balancer. This is a much more accurate method of determining the position of the crankshaft, and allows the computer to determine within a few degrees the exact position of the crankshaft (and thereby all connected components) at any given time.
Posted on Dec 27, 2008
the sensor should be located behind the front bumper grill.look through the bumper grill and you should see the ambient temp sender.on the dash,does the display where the temperature used to read have 3 dash lines?if so there is an open circuit in the wiring to the sensor.this will cause the aircon not to work..good luck.
Posted on May 18, 2010
Testimonial: "yes, 3 dashes, i ordered a new sensor and will check wiring, thank you so much for you help!! "
Yes you can do it yourself. Here is an image showing the location of sensors on your vehicle (TPS) Throttle Position Sensor...located on the throttle body. Should have 2 screws holding it in place. You can view it in Opera and blow the image up or print the image out and blow it up on a copier if you need to. Hope it helps
If this helps you resolve your problem, please
consider giving me a good rating and a quick
thanks or good job.It will help me as well.
Posted on Oct 27, 2010
Tips for a great answer:
Jan 06, 2015 | 2002 Hyundai Santa Fe
Nov 29, 2013 | 2007 Hyundai Santa Fe
Mar 22, 2013 | 2007 Hyundai Santa Fe
Jun 05, 2011 | 2002 Hyundai Santa Fe
Sep 20, 2010 | 2007 Hyundai Santa Fe Limited
Jul 04, 2009 | 2001 Hyundai Santa Fe
Aug 18, 2017 | Hyundai Cars & Trucks
144 people viewed this question
Usually answered in minutes!