Question about Cars & Trucks
Have a load test done on the battery as you may have a dead cell which will cause your faults.
Posted on Jul 29, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I Have A Seville 1990, When That Happen To Me I Got The Inginion
Replaced Problem Solved. What Is Happening Is Your Key Has A Chip And That Chip Is A Resister And When The Valve Is Not Sented To The Computer It Disengages the Fuel Pump And Than Tells You To Wait. Soon All That Will Happen Is You Will Get The Wait 3 Mins And It Will Never Start, A Good Locksmith Can Take Care Of This For You And That Will Save You Some Money. Cause If You Go To The Dealer Ouch They Will Hit You Up. But I Asure This Is How It Will Happen Cause It Is How It Happen To Me
And Sorry There Is No By Passing The Computer
Posted on Dec 25, 2008
if the vehicle starts then stops and the anti-theft light is flahing you may need to re-set the pass-key system to do this you will need to atempt to start the vehicle and when it stalls leave the key in that position and watch the anti-theft light. it should flash on and off for about 5 to 10 minutes. when it stops flahing turn the ignition to off then try to restart your vehicle
Posted on Mar 22, 2009
SOURCE: Replaced stock bcm with used.
A used body control can be used in a vehicle other than the vehicle it was installed in. the body control module when first installed is programmed with the vehicle vin number. the vin number can not be changed was it was written to the BCM. the oprions can be always change in the BCM but not the VIN number. basically the used bcm you have installed has the vin number from the vehicle was installed in, now the vin number in the used BCM doesnt match all the other control modules
Posted on Jun 08, 2011
Tips for a great answer:
Jan 17, 2013 | 2007 Pontiac G5 Gt Coupe
Jan 08, 2013 | 2008 Pontiac G5
Sep 08, 2011 | 2008 Pontiac G5
Aug 14, 2011 | 2008 Lincoln MKX
Aug 08, 2011 | 2008 Dodge Magnum
Jun 26, 2011 | 2006 Dodge Charger
Mar 30, 2017 | 2003 Dodge Caravan
167 people viewed this question
Usually answered in minutes!