Question about Cars & Trucks
Need wiring dieagram for replacing factreey raido with new one
Go to Autoleads website and look for your car and the radio you intend to fit. They will sell you an adaptor that will allow you to fit a new radio without wrecking the car wiring.
Posted on Jul 28, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: radio stuck in safe mode
Turn on radio - the word SAFE will appear in the display. Press th
P.SCAN and RBDS buttons simultaneously and hold them down until "1000"
lights up in the display.Release buttons.Do not, under no circumtances,
continue holding them down or press them once again. This will cause
the radio to consider the number 1000 to be the input code.Use station
buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use
the button 1 to enter the first number 2 for the second number 3 for
the third number and 4 for the last number.Once you have entered the
code and it shows on the display,press the P.SCAN and RBDS buttons down
again simultaneously and hold them down until the word SAFE appears in
the display.Release buttons. Soon afterwards a frequency will be
PLEASE RATE THIS !!!
Posted on Jun 11, 2008
There is a flap in the boot that you need to flip open. Once opened, there are two screws with really big round ends as big as 1.5 - 2 centimeters in diameter. One is black on the lower end of the light and the other is white which is on the upper end of the lamp. You may need a tourch to see them better, however you can not miss them. Unscrew them with your fingers by twisting these anti clockwise. You need to hold the lamp as as soon as these 2 screws are released, the lamp will then be held by a wire connector which you can remove. You then need a star head screw driver to open 2 screws which will allow you to remove the bulbs that are deffective and have them replaced. Then just retrace your steps.
Posted on Aug 17, 2009
Testimonial: "Thank you. I thought the knobs you mentioned were the ones I needed to turn but they were so unlike any other securing device I wanted to be certain."
SOURCE: Audi TT HID bulb needs replacing
You can change the bulb easily yourself in about five minutes, especially on the passenger side. You may want to disconnect the battery, though I don't know if that is necessary. You may also want to handle the bulbs wearing latex or nitrile gloves so as to not get your skin oil on the glass.
1. Remove the decorative cover that conceals the Coolant reservior. There is a single philips screw near the firewall that holds the cover down.
2. Find the back of the headlight and pull the metal wire clip that holds the back of the headlight cover toward the engine. Remove the cover.
3. Look inside and find the back of the HID bulb--it will be toward the outside fender. Twist the connector until it separates.
4. There is a retainer ring that holds the bulb in. Again, twist that until it comes loose. The bulb should come right out.
5, Put the new bulb in, noticing the notch is on top. Also, attach the retainer ring. It is marked "Top" to help orient it. Reattach the connector with a twist.
6. Make sure everything is firmly in place. Reconnect your battery and test the lights. Finish putting anything else back on.
Posted on Nov 21, 2009
The radio is in safe mode and requires the security code to reactivate it. First check through your service documentation for a credit card sized card that Audi print the code on.
If this is missing the only other way to retrieve the code is
1) Remove the stereo from the dash and retrieve the serial number stamped on the back of the stereo.
2) Contact your Audi dealer with both the serial number and the chassis (VIN no) of your car. You will find the VIN no on your registration document.
3) If you do it this way and have retrieved both of these numbers yourself your Audi dealer will run the numbers and give you the code free of charge.
Hint: Some dealers will attempt to charge for this service but they are not authorized to so. On the original safe code card from Audi it specifically states that if you lose the code your Audi dealer will supply this free of charge. Please ensure to quote this information to the dealer if they attempt to make any service charge.
Hope this helps. Please do rate my answer and thanks for using FixYa.
Posted on Nov 22, 2009
Tips for a great answer:
Jan 23, 2015 | 2004 Audi TT
Jul 15, 2014 | 2002 Audi TT
Jul 28, 2013 | 2003 Audi TT
Jun 06, 2011 | 2005 Audi TT
Jul 11, 2009 | 2003 Audi TT
May 26, 2009 | 2001 Audi TT
Apr 21, 2009 | 2003 Audi TT
64 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: