Question about Cars & Trucks

Open Question

Holden astra ah 2006 1.8 engine torque settings

Cam torque settings

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: torque settings for holden 308

see if this site helps you.

http://www.boxwrench.net/specs_index.htm

Posted on Nov 13, 2008

stevenhurc
  • 450 Answers

SOURCE: torque specs for big ends, mains, cam caps

found local Adelaide engine reconditioning shop that knows all about g200 twin cam EFI isuzu motors for parts and engine components ( pistons, rings, bearings etc. ) and machining, Chris Milton engine reconditioning. They will do machine work for me so then i can put it together.

Posted on May 27, 2009

stevenhurc
  • 450 Answers

SOURCE: torque settings for a holden rodeo 3.5 ra. Head

stage 1 = 29Nm(21 lb ft/3.0 kg-m)
final = 64Nm(47 lb ft/6.5kg-m)
do not reuse head bolts or apply any lubricant to the bolts. Do up bolts in following order for each head.
6 1 3 7
front
5 2 4 8

Posted on Dec 05, 2009

dcramer531
  • 1654 Answers

SOURCE: I need the torque settings for the cylinder head

http://www.autozmagz.com/isuzu/2000-isuzu-trooper-s-torque-specifications/
try here and see if they can help. You can download manuals for free here.

Posted on Nov 23, 2010

  • 184 Answers

SOURCE: I have a 1998 Holden

I cannot find a EL20B in my data,but all Astra listed had the same head sequence as shown:

10 6 2 3 7

9 5 1 4 8

the torque specs for the C20XE,C20NE,X20XEV were all
25nm(18lb/ft),-then 90 deg,-90deg,-90deg.
Z20LET were as above plus an additional 15deg.
Same data for smaller and larger engines(except a couple that were 45deg instead of 15)
Make sure that you replace the head bolts with new,they are torque to yield bolts that are designed to stretch to 'plastic' state,and should not be reused.
Put grease(graphite if you have it) under bolt heads and washers,oil the threads.
Usually the head sets come with the torque specs.
I hope this helps you.

Posted on Apr 02, 2011

Testimonial: "Fantastic, very clearly explained and rapid response to my questions. Thank you."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to do any oil and filter change on my 2006 Astra 4 door hatch it is Holden GM model AH CDx it has an ecotec 1.8l unleaded petrol engine


So what is the problem? The new filter for a Z18XE screws directly on to the front of the engine block behind the radiator, and the oil drains out of the drain plug at the base of the sump. The Z18XER only differs in that the filter sits in a round black housing visible from the top right of the engine and is requires a 32mm spanner to remove the cover. The filter is different from that on the Z18XE

Jul 21, 2016 | Opel Cars & Trucks

1 Answer

My 2007 Holden Astra AH stutters while idling and when accellerating, why?


The engine is miss firing and changing the oil and oil filter will not rectify that problem because they are totally unrelated. There are numerous possible causes such as a vacuum leak in the engine intake system. If you wish you can remove the engine cover and check the condition of the rubber hoses leading to and from the intake system. The vehicle needs to be connected to an appropriate diagnostic scanner to see what fault codes are being thrown up so the specific cause can be identified.

Feb 11, 2015 | Holden Cars & Trucks

1 Answer

How to chang fog light holden astra ah ?


unscrew lens. take out bulb?
some lens dont, come off, and at Rear is a socket you un twist.
all cars all lamps like this. just looking a moment this comes to mind.
ah no screws. whats behind here, ah,, ,there.

Jun 16, 2014 | Holden Astra Cars & Trucks

1 Answer

01 holden vectra timing belt adjustment?


Now is this a 1.8 petrol twin cam or a single cam engine as it will be the same as our opel astra or zaffiro but these belts do not stretch and as such iam perplexed a bit by your question here but either engine can be tightened but shouldnt need it really

Mar 08, 2012 | Holden Vectra Cars & Trucks

2 Answers

I have a 1998 Holden Astra eng noEL20B24119 and want to know the Head bolt torque settings and sequence. The engine is the transition model with twin tappet cover seals. has the torx star headed bolts.


I cannot find a EL20B in my data,but all Astra listed had the same head sequence as shown:

10 6 2 3 7

9 5 1 4 8

the torque specs for the C20XE,C20NE,X20XEV were all
25nm(18lb/ft),-then 90 deg,-90deg,-90deg.
Z20LET were as above plus an additional 15deg.
Same data for smaller and larger engines(except a couple that were 45deg instead of 15)
Make sure that you replace the head bolts with new,they are torque to yield bolts that are designed to stretch to 'plastic' state,and should not be reused.
Put grease(graphite if you have it) under bolt heads and washers,oil the threads.
Usually the head sets come with the torque specs.
I hope this helps you.

Apr 02, 2011 | Honda Accord Cars & Trucks

1 Answer

Torque specs for big ends, mains, cam caps


found local Adelaide engine reconditioning shop that knows all about g200 twin cam EFI isuzu motors for parts and engine components ( pistons, rings, bearings etc. ) and machining, Chris Milton engine reconditioning. They will do machine work for me so then i can put it together.

May 23, 2009 | 1999 Isuzu VehiCROSS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...