Question about Cars & Trucks

1 Answer

How to clean radio controls on steering column on chevrolet Tacoma 2006

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Use a cleaning solution and a air gun and air compressor. I detail cars and this is what we do.

Posted on Aug 01, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2039 Answers

SOURCE: Short in steering column wiring

torque bit 20 to remove the air bag bolt in the back cover stering puller stering puller to push plate phillip screw driver that about it pierre

Posted on Oct 19, 2008

baccardo
  • 150 Answers

SOURCE: the tuner is gone in my OE radio. Will a PY520 replace my OE radio and work with my steering wheel controls?

if the connector is the same then you should be able to use it however it may require programming

Posted on Apr 18, 2009

  • 1 Answer

SOURCE: repair tilt steering column on sk 1500 chevrolet

http://www.chevyasylum.com/column/tiltcol.html

Posted on Jul 07, 2009

  • 43 Answers

SOURCE: The cruise control in my 2005 Ford Freestar just

clock spring in the steering column is my guess. They are delicate and have to do with anything in the steering wheel like airbag, horn, or anything that is operated by buttons on the wheel. These wires have to turn constantly with the steering wheel and the "clock spring" goes bad often enough

Posted on Jul 08, 2009

  • 563 Answers

SOURCE: Remove steering wheel with a radio control next to it

Try: slightly wiggle sideways, and driver's face

Posted on Nov 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Horn and steering wheel controls not working.


    images for 2004 Suzuki Forenza no controls on

    Suzuki Steering Wheels and Horns ' eBay

    www.ebay.com/sch/Suzuki-Steering-Wheels-and-Horns/.../i.html
    eBayFind great deals on eBay for Suzuki Steering Wheels and Horns in Steering ... 2004Suzuki Aerio Grey and Black Steering Wheel with Airbag OEM 2003 ... 04 05 06 07 08SUZUKI FORENZA- Steering Column, Black with Key, NO AIRBAG ... 2006 Suzuki Aerio Gray Leather Steering Wheel with Controls OEM 05 06 07 Nice.

Sep 25, 2015 | 2004 Suzuki Forenza

1 Answer

I have my code but dont know how to put it in my 2006 Chevrolet radio


This is easy, you will need a 7mm socket. To the right of your radio you will see the end of the square trim bezel around the radio, air bag switch, hvac controls ect, start by pulling firmly on that panel, you'll then start pulling toward the drivers door carefully getting the panel looser and looser, drop your steering wheel down with the adjuster on the bottom left of the steering column and remove the panel, next remove the 2 7mm screws on the left of the radio and the 1 7mm on the right of the radio, remove the radio and electrical connections, reverse for install.

Sep 14, 2015 | Chevrolet Cars & Trucks

2 Answers

WHERE IS THE FUSE FOR MY POWER STEERING IN MY 2006 CHEVY HHR LOCATED?


You vehicle has two fuse's ! one in the underhood fuse box EPS/STR WHLCNTRL an it is a 60 amp . An there is one in the BCM fuse center - EPS 2amp fuse ! do you know what an where the BCM is ? The BCM - body control module !
Body Control Module (BCM) location
Under the I/P below the radio on the right side of the center console .19
EPS/STR WHL CNTRL
2A
Electronic Power Steering (EPS) Column Assembly and Inflatable Restraint Steering Wheel Module Coil

Aug 05, 2015 | 2006 Chevrolet HHR

1 Answer

If i have a radio controlled steering column with floor shift can i use a 97 steering column without radio control


should not be an issue. the wiring connector for the radio control is on a seperate wiring harness, and will just be left abandoned. all the other wiring should be the same. good luck!

Aug 02, 2010 | 1999 Pontiac Bonneville

2 Answers

Wheres the deposit for pwer steering


The HHR does not use power steering fluid; it has an electric power steering motor which is mounted on the steering column under the dash. The motor has no adjustment and no maintenance is required. If you are having problems with the power steering failing you will need to contact the dealer.

Apr 11, 2010 | 2006 Chevrolet HHR

1 Answer

I have a chevy cobalt coupe 2005-2006. More like a 2005 but considered a 2006. It was wrecked, and the radio will not turn off. Think it might be a fuse but I need to know which fuse to check/replace. It...


If the radio fuse was blown,the radio wouldn't work.
You are guessing and have no idea what to do.
Get a wiring diagram and a VOM Meter ,and learn how to use it.

Apr 10, 2010 | 2006 Chevrolet Cobalt

1 Answer

Electric power steering info comes on after a few minutes of use if i turn off the engine it works again for a few more minutes or hours.


The power steering control module is the problem. The diagnostics say to replace the power steering motor first, if the steering works its fixed. Most of the time it don't fix the problem and the steering column has to be replaced anyway. The power steering control module is installed on the column and the only way to get it is to replace the column. Dealer cost is around 650.00.

Jan 19, 2010 | 2006 Chevrolet Malibu

1 Answer

I have steering wheel mounted controls that have burned out, and wanted to know where I could buy replacements.


without more detail,are we talking audio/cruise control/and the like .
On the back side of the steering wheel there are metal rings that the switch wires are connected to, they make contact to spring loaded pins.
that way the wheel can go around and around .
some times its as simple as cleaning those contacts.
if all the switches went out at the same time i would check the wire terminal plugs at the bottom of the steering column.
your local chevy dealer can help you out on parts.
or if your trying to economize try a local or on-line automotive recycling yard.
hope this gets you going

Nov 18, 2009 | 2006 Chevrolet Avalanche

1 Answer

Power Steering


Yes your absolutly right.
I have a 2006 Cobalt and my power steering completly failed. And this isn't a cheap fix. A quote of over $700 for a steering column replacement because these cars run electronic steering. Unless your under warrenty start searching salvage yards for working steering columns.

Aug 27, 2009 | 2006 Chevrolet Cobalt

1 Answer

Car dangerous with no power steering


This is a well known problem with these Cobalts. Ours (we had 2) both had to have the steering column replaced to fix this.
It's caused because the power steering assist (electric motor) on the column stops working. It usually will reset after you shut the car down for a few minutes and restart it.
Hopefully it's under warranty, else it'll cost a grand or more to replace.

Dec 30, 2008 | 2006 Chevrolet Cobalt

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...