Question about 2008 Toyota Yaris

Open Question

Evaporator system p0453 - 2008 Toyota Yaris

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced bad fuel pump started it up works good but now I'm getting PO543 code


Code P0453 refers to "Evaporative Emissions Control System Pressure Sensor High Input", see link for full details. Hope this helps. http://www.obd-codes.com/p0453

Feb 09, 2016 | Cars & Trucks

1 Answer

C0057 code and p0453


P0453 is a problem with the Evaporative Emission Control System Pressure Sensor High Input

C0057 is Vehicle Dynamic Control interruption ( traction control problem basically)

Apr 18, 2014 | 2009 Subaru Forester

1 Answer

Diagnostic code p0701


P0453 means EVAP emission pressure sensor high input. Possible causes:
- Faulty Evaporative Emission System (EVAP) Pressure sensor
- Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted
- Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection.
Code p0701 means Transmission control system range/performance. Possible causes:
- Open or short transmission control system circuit
- Poor transmission control system electrical connection
- Check powers and grounds to Transmission Control Module (TCM)

Aug 27, 2013 | Cars & Trucks

1 Answer

I have a code p0453 is a ford fiesta 2012 what's the probleme


P0453 FORD - EVAP Pressure Sensor/Switch High
Possible causes- Evaporative Emission System (EVAP) Pressure Sensor/Switch harness is open or shorted
- Evaporative Emission System (EVAP) Pressure Sensor/Switch circuit poor electrical connection
- Faulty Evaporative Emission System (EVAP) Pressure Sensor/Switch
- Damaged fuel tank pressure sensor

This likely is an emission system warranty problem.

Oct 15, 2012 | Cars & Trucks

1 Answer

What's trubleP0453 on 99 gmc new Sierra 1500 4.8


P0453 - Evaporative Emission Control System Pressure Sensor High Input

Possible causes- Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted
- Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection
- Faulty Evaporative Emission System (EVAP) Pressure sensor
- Damaged fuel tank pressure sensor

Oct 11, 2012 | Cars & Trucks

1 Answer

How to fix a engine code p0453 on a 2000 Kia sephia


P0453 KIA - EVAP Emission System Pressure Sensor High Input

There is no one magic bullet fix.
Here are the poss issues that trigger the code and light.Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted
- Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection
- Faulty Evaporative Emission System (EVAP) Pressure sensor
- Damaged fuel tank pressure sensor (same part as above)

Sep 10, 2012 | Cars & Trucks

1 Answer

Po453 e150 econoline


P0453 - Evaporative Emission Control System Pressure Sensor High Input
Possible causes- Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted
- Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection
- Faulty Evaporative Emission System (EVAP) Pressure sensor
- Damaged fuel tank pressure sensor

Sep 05, 2012 | 2007 Ford Explorer Eddie Bauer

1 Answer

Could it be that the ecu is wrong


No it is not Catalytic Converter related. Your fuel tank pressure sensor must be disconnected or the wiring to it defective for the evaporative emission system.
P0453 HONDA - Fuel Tank Pressure Sensor High Voltagexicon.jpghttp://engine-codes.com/p0453_honda.htmlForum CodePossible causes- Fuel Tank Pressure sensor harness is open or shorted
- Fuel Tank Pressure sensor circuit poor electrical connection
- Fuel Tank Pressure Sensor
- Faulty Engine Control Module (ECM) When is the code detected?A high voltage signal from the fuel tank pressure sensor is sent to Engine Control Module (ECM).
P0450 - Evaporative Emission Control System Pressure Sensor Malfunctionxicon.jpghttp://engine-codes.com/p0450.htmlForum CodePossible causes- Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted
- Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection
- Faulty Evaporative Emission System (EVAP) Pressure Sensor
- Faulty Engine Control Module (ECM) When is the code detected?- An improper voltage signal from EVAP control system pressure sensor is sent to ECM.

Aug 10, 2012 | 1998 Honda Civic

1 Answer

I have a 2000 Pontiac Bonneville 3.8 non supercharged. It is throwing the codes P0446, P0452, P0453. Yes it is throwing all of them and that is what is confusing me. Just reset the codes, did a...


they are all emission faults

P0453 OBD-II Trouble Code: Evaporative Emission Control Pressure Sensor High Input. P0453 code means that a reading from the engine's evaporative pressure sensor is higher than normal due to fuel tank vapor leaks into the system.

saturated carbon canister
sensor faulty
rubber evap hoses at the tank perished

idea
check the tank fuel cap seal is working
replace the cap is one possible cause

check the fuel pump pressure or for injector rail leak
P0446 Evaporative Emission Control System Vent Control Circuit Malfunction. The code P0446 is set when the engine computer recognizes a fault or restriction at the vent control part of the Evaporative emission control system (EVAP).

The Code P0452 indicates that the Evaporative Pressure Sensor is indicating pressure change values that are below specification, during the EVAP Monitor test and/or the operation of the vehicle.


index-n3tzgjtvihckmmjcgghducoc-3-0_2.jpg

Apr 28, 2017 | 2000 Pontiac Bonneville

3 Answers

What P0453-Evaporative Emission control System Pressure Sensor h


P0453 is for the fuel tank pressure sensor. This code means that the voltage on the sensor was greater than 4.5V during key on engine off or during any engine operating mode.
Normal voltage from this sensor with no vacuum or pressure on the system should be 2.37 to 2.97V.
PCM sends a reference voltage of 5V to the sensor and tells if there is pressure or vacuum in the fuel tank by the voltage that returns from the sensor.

Possible causes are:

  • FTP circuit open
  • VREF shorted to VPWR
  • Damaged PCM
  • FTP circuit shorted to VREF or VPWR
  • SIG RTN circuit open
  • Damaged FTP sensor

  • Usually it is a loose connector at the sensor or a bad sensor.
    It mounts on top of the fuel tank,has a 3 wire connector. To replace it you have to push down on it and twist,if I remember right CC.

    Mar 10, 2009 | 2000 Ford F150 Flareside SuperCab

    Not finding what you are looking for?
    2008 Toyota Yaris Logo

    Related Topics:

    63 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    74945 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7697 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...