Question about 2006 Kia Sorento

Open Question

Obd2 model 3100f

I can get my obd2 model 3100f to fit to test my car, what do I need to do? buy an adapter? If so which one and where?

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

So how did you get from $7e8 to po708 ?

Because there aren't any codes like you have there $7e8 ,where did you pull this from ? What year , make and model vehicle .

Dec 07, 2016 | Cars & Trucks

2 Answers

Fuel gauge not working on 2005 dodge ram 1500

If your car uses the CAN-bus system it is possible the system must be told it has a new fuel pump and gauge unit fitted before it will work.

Any codes connected with the instruments can't be read on a normal obd2 scanner or code reader and altogether more dedicated equipment and software is needed for car and chassis systems. Obd2 is only for things that will or are likely to affect tailpipe emissions.

Apr 08, 2016 | Dodge Cars & Trucks

1 Answer

How to test the obd codes

What is year--make--model? Generally 94 model year and older is obd1. 96 and newer is obd2, generally. 95 can be a cross-over year and could have a hybrid diagnostic connector.

Usually with obd2, you need an obd2 code reader. OBD1 you should be able to access some codes, yourself, w/o a code reader. Different makes can have different procedures for accessing codes/obd1.

Mar 05, 2015 | Cars & Trucks

2 Answers

Why does my innova 3100 obd2 scan gives err message on obd2 certified car ?

Because it is likely not up to date on CAN BUS technology, an uprade is suggested.

May 27, 2014 | 2006 Chrysler 300

1 Answer

Obd2 model 3100

It should fit the connector under the steering column for the engine computer. The connector is shaped so you can only plug the code reader in one way.

Jul 27, 2013 | Kia Sorento Cars & Trucks

1 Answer

Opel 10Pin to OBD OBD2 16PIN

you will need an adapter, O'riellys, or auto zone will have these.

Sep 29, 2012 | Cars & Trucks

2 Answers

Azera check engine reset

there is no reset for an engine light. it can be turned off using a scan tool, but if the problem that brought the engine light on in the first place hasnt been corrected it will come back on anyway.

Feb 22, 2012 | 2007 Hyundai Azera Limited Sedan

1 Answer

Need to run fail codes for f150 2000 and how to short the computer to run test

Buy a cheap OBD2 tester (about $35) and plug it in to your vehicle to show trouble codes and sensor values.
Codes can then be cleared from computer to turn off check engine light.
The OBD2 plug has to be with in 3 feet of steering column on all OBD2 equipped vehicles.

Sep 01, 2009 | 2000 Ford F150 Flareside SuperCab

1 Answer

Trying to read check engine light on my 95 sunfire it has a obd2 plug but the obd2 tester wont read my codes how can i test this with out going to dealer?

Most consumer available scanners read OBDII on 96 or newer vehicles. If your car does in fact have a OBDII plug then all you need is the software in your scanner to be able to read OBDI codes...a 95 is running OBDI. Advance Auto or Autozone might have a OBDI compliant scanner for free...just tell them you have the OBDII port so they don't take up all your time digging for the adapter!

Jun 10, 2009 | 1995 Pontiac Sunfire

Not finding what you are looking for?
2006 Kia Sorento Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers


Level 3 Expert

75807 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides