Question about Cars & Trucks
I have a 01 crown Vic p71 . I just change the timing guides with tensioner, remove oil pan and clean screen. Also I remove valve cover to make sure cam's was getting lubed. At this time my valve still tap and engine has a little knock with vibration. Would u think I need a new oil pump also my oil gauge jump up and down .
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: engine knock 1999 ford crown vic
Are u using the recommended fuel ? if so try running a couple of cans of fuel injection upper cylinder cleaner through the system with the next few tanks of gas, try LUCAS brand, it is among the best, the next step is to have the engine de-carboned by the dealer, this works very well, you can also remove an octane selection jumper, it retards the timing 2 degrees, that will most times stop the ping.
Posted on Sep 11, 2008
http://servicemanual.blogspot.com/2007/09/daewoo-leganza-my2000-service-manual.html Try this link. download free manual, has timing specs and more.
Posted on Nov 15, 2008
I replaced the same part on a 1994 Crown Vic. There are a few bolts which go through rubber mounts on the firewall and that is how the wiper motor fits against the firewall. There is a clip on the wiper drive that must be pressed and slid off the wiper shaft. The hardest part was getting clearence between the engine and wiper motor. If I remember there was a way to turn the wiper case to clear the engine. I have asked myself why this was engineered like this? There is nothing important in the way that 3/4" of clearance could have been given for removal.
Posted on May 06, 2009
Well, from the oil pump it goes into your oil filter so the lines going from the pump into the filter could be clogged. check that and see. Also on most imports I have found that they have to be primed after the oil pump has been replaced. Buy a oil pressure gauge and hook it up. Disconnect your fuel and spark delivery and then just crank over your motor to make sure you have good pressure. It takes up to 30 seconds to build on some cars. hope that helps.
Posted on Jul 21, 2009
Tips for a great answer:
Jul 06, 2016 | Cars & Trucks
May 05, 2015 | Cars & Trucks
Feb 08, 2015 | 2007 Ford Crown Victoria LX Sedan
Apr 13, 2013 | Cars & Trucks
Mar 02, 2011 | 2003 Ford Crown Victoria
Feb 16, 2011 | 1999 Ford Crown Victoria
Feb 26, 2010 | 2008 Ford Crown Victoria
Nov 02, 2009 | 2003 Ford Crown Victoria
Jun 27, 2009 | 1999 Ford Crown Victoria
Jan 10, 2009 | 2001 Ford Crown Victoria
190 people viewed this question
Usually answered in minutes!