Question about Nissan Altima
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: PCV Valve location diagram.....
I will assume you you have the Duratec engine (24 valve). It is located under the intake manifold on the transmission side of the engine. Real tough to get out without some real long pliers with a ring type end on it. It needs to be twisted counterclockwise to release it. replace the hose to it while you are there also , they degrade and will cause a vacuum leak.
Posted on Oct 19, 2008
the pcv is located on the rear(firewall) of the drivers side valve cover.turn counterclockwise and pull to remove be careful there are 2 small tabs inside the pcv hole in the valve cover(can feel with small finger) this is to hold valve in place so it wont leak.if you have a oil leak at the pcv a quick fix is to put a small amount of silicone around the pcv o-ring and install.wait hours for silicone to set up.
Posted on Oct 21, 2008
it is down under the intake manifold. the intake manifold must be removed to get to it. this vehicle is known for developing a vacum leak in the elbow hose that connects to pcv valve, so ive done a few.
Posted on Feb 19, 2009
Tips for a great answer:
Sep 03, 2015 | Toyota Cars & Trucks
Feb 26, 2012 | Ford Focus Cars & Trucks
Sep 13, 2011 | 2005 Ford Ranger
Jan 23, 2011 | Dodge Caravan Cars & Trucks
Feb 19, 2010 | 2003 Ford ZX2
Feb 08, 2009 | 2000 Chevrolet Blazer
Oct 19, 2008 | 2004 Ford Taurus
Sep 25, 2008 | 1998 Ford Explorer
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: