Question about Cars & Trucks
That would depend on where you live and what you have done to the car.
Plugs, wires, and filters would cost around $100 if you buy them yourself.
Posted on Jul 27, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: lincoln town car
You either have a short in the switch and the vibrations are intermittely making contact then no contact in rapid succession or a wire is loose to the switch. Is it just the headlights or just the dash lights or all lights, all lights I would suspect the switch, if just the dash lights the dimmer switch.
Posted on Jan 09, 2009
It is located on the left frame rail in front of left rear tire.It has a plastic clip in each fuel line that will be white in color.Remove the clip then disconnect fuel line.Make sure to replace the clips,DO NOT reuse the old ones. Install the new clips into the connector then snap the connectors on to the filter.
Posted on Mar 01, 2009
Check your gas cap. If someplace can test it you might luck out. This website advertises manuals and info online. The evaporator cannister is suppose to purify excess fuel vapors. But a system which is not sealed will code an error lamp.
Posted on May 05, 2009
SOURCE: Changing Windshield Wiper Blades
if a picture is worth a 1000 words then this video is worth a bunch more... wait thru the ad at the beginning and you'll see it done ...
Should do it for you! http://www.expertvillage.com/video/9223_wiper-blades-remove.htm
Posted on May 25, 2009
First disconnect battery. Use a floor jack to lift vehcile from passenger side. Use floor jack to help hold up car for safety. The starter will be located ton the passenger side. It is held by two bolts. There will be one wire to a 10 mm nut. remove. There will be a couple of wires in cluding one from the baterry to a big bolt remove the nut. Remove the two bolts being careful as starter may drop. You can use the floor jack to help you since the floor jack is suppporting the vehicle. Reinstall in reverse.
Posted on Nov 17, 2009
Tips for a great answer:
Aug 26, 2015 | 1992 Lincoln Town Car
Jun 25, 2012 | 1999 Lincoln Town Car
Nov 19, 2010 | Lincoln Town Car Cars & Trucks
Jun 29, 2009 | 1989 Lincoln Town Car
Jan 09, 2009 | 1992 Lincoln Town Car
35 people viewed this question
Usually answered in minutes!