Question about Cars & Trucks

Open Question

Squeaking when turning steering wheel

2006 ford e250 front end squeaking while turning wheels

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: HOW TO STOP THAT FRONT END SQUEAKING NOISE!! (NOT STEERING PUMP)

Probably the upper strut plates.

Posted on Sep 05, 2008

  • 156 Answers

SOURCE: squeaking when turning steering wheel

that would be your power steering. The fluid may be low.

Posted on Feb 23, 2009

  • 6982 Answers

SOURCE: steering wheel squeaking

they do that sometimes...Usually if you take some silicone spray and squirt it all around the area where you can hear the squeak,it will go away.

Posted on Mar 20, 2009

  • 400 Answers

SOURCE: Squeaky steering wheel?

Try using some type of lubricant on the pass through on the fire wall. If you look down under the dash by the break peddle you will see where the steering shaft goes through the firewall. Get a litium grease to spray between the shaft and the rubber groumet that it goes through. Not a whole bunch but enough. spray it a little then trun the wheel back and forth then do it again.
This should solve the problem, If it's the noise that I have been encountering lots at work.

Posted on Oct 24, 2009

  • 1 Answer

SOURCE: 2000 Chrysler Sebring Conv. replaced struts-front end squeaks on brake and turn

the reason why ur car squeaks is the ball joint i have a chrysler and same thing happened n my friend knows a lil bit bout cars had the same prob with hiss car and then the tire came of came to find out it was the ball joint causing the squeaks its not bearings or ur brakes car places told me same thing didnt fix it it is 100 percent ur ball joint and when u ask for the part ask for a lower control arm with a ball joint and install it by whoever

Posted on Nov 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Ford 500 steering wheel locked or power steering not working. Check system alert and battery light turns on.


Call your Ford dealer and ask them if you car has a locking steering wheel.
Since "forever" ago, there was a were "star wheels" attached to the inside of the steering column, for the purpose of preventing theft by locking the steering wheel when the key was removed.. The bad side was that those locks can jamb if the steering wheel
is at the end of it's travel, such as can happen if the front wheel of the car is jammed against a curb when parked.
Your fix might just be to turn the steering wheel whilst trying to start it, though it may take a little muscle.
God bless your efforts.

Jul 04, 2017 | Ford Cars & Trucks

1 Answer

Squeaks and squills


are you having problems with low pressuer imn power steering pump? the other could dryrot in (a) fram bushings ,if you use your whole body weight and push down on front end and you get same noise you'll narrow it down do this with motor off, hope this gives you some things to look at good luck.

Oct 01, 2012 | 1999 Ford Crown Victoria

1 Answer

It squeaks like a 50 year old vehicle. The front end squeaks even if ur not moving,just turning the steering wheel it will squeak then driving


Hi!
Check the power steering fluid level, if OK, your power steering pump may need to be replaced. If in doubt, take vehicle to and AutoZone or similar autoparts store and have one of the attendants check it out.
Don't forget to rate this post!!

Sep 11, 2010 | 1998 Ford Explorer

2 Answers

2004 Mazda tribute steering wheel squeaking


Well a steering flush would not necessarily be related to squeaking.

So, you need to locate exactly where the sound is coming from...
It really sounds like steering wheel turning and resistance causes the noise, is this constant, or only while actually turning the wheel?

Likely it would be semi constant, so that would focus you on the assist portion... Be careful around all moving parts, but you need to locate the source.

Try taking a section of heater hose, and listen through one end and move carefully around with the other end and see what you find. Likely something under the hood, with your note about window open...

Now, if the squeaking stops when the steering wheel stops turning, now steering components are suspect.... So, again, louder with window down makes me think outside and in front...I would stand in front of the car, have your handy assistant actuate the steering wheel, and you decide which side, right or left.... Suspect items that squeak only during steering wheel input include, amongst other things, the entire strut, all ball joint, including joints in the steering linkage.... Be sure to keep clear of moving parts, your handy assistant would not know they they are crushing you, while truning the wheel......

Doc


Sep 19, 2009 | 2001 Ford Escape

2 Answers

I get a squeaking noise when i turn the steering wheel right or left. replaced struts, and stablizer link rod on 2001 ford escape


I have a 2002 Escape V6. I had a squeak when turning... even when standing still. It was fairly low mileage: 40,000 miles?
It was the outer tie rod. You could feel it squeak in your hand while someone else turned the steering wheel.
I disconnected the tie rod. I wasn't worn, just squeaky. I squirted a little WD40 inside the boot, and worked it in. Reassembled and squeak gone.
I bought a replacement tie rod, but never had to put it on. I'm now at 110,000 miles.

Jul 27, 2009 | 2001 Ford Escape

1 Answer

FRONT END SQEAKING


worn out strut tower bearings.

Apr 13, 2009 | 2006 Dodge Sprinter

2 Answers

Noise in front end when steering wheel is turned


is your van 4WD, AWD, or rear wheel drive? if it is 4WD or AWD, the front axle seals might be going bad. PLEASE RATE MY ANSWER.

Feb 26, 2009 | 1997 Ford Econoline

1 Answer

I am being told to replace the bolt joint because the steering is making a squeaking, grating sound when I turn it. Do you think I should replace it or try the power steering fluid?


check power steering add if needed if still squeaking check see if belt sliping if not that check the front end parts like ball joint and wheel bearing

Jan 02, 2009 | 1997 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...