Question about 2007 Ford F

1 Answer

Radio code bought the van but don't have the radio code, need code & instructions to open radio.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

OBD system tests
Possible fault codes:
P1000 OBD system tests Operation not
completed
Setting of the fault code P1000 has no
influence on the system <Engine
management>, smooth running or performance
as long as it is automatically erased
whilst driving.
The fault code P1000 indicates noncompletion
of system tests.
* Misfire detection
* Evaporative emission control system
* Exhaust-gas recirculation
* Lambda sensor
* Exhaust gas catalytic converter
The fault code P1000 cannot be erased. It
is cancelled automatically once the
vehicle has completed certain driving
cycles.

Posted on Oct 09, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont radio work after replacing battery?


by replacing the battery the anti-theft code requirement has been activated
check the radio forums and comments on this site as there are ways to recover the code

Jul 25, 2017 | 2001 Chrysler Town & Country

1 Answer

My heater hoses have been removed and bypassed. I need a heater hose diagram for my 1998 chrysler town and country van with a 3.8 L. I don't know which hose will plug into which heater core tube


That's easy

Drive around back of a dealer,walk in the open
service bay doors & ask a tech to come out &
tell you.

I walk into dealers all the time, anywhere I want to go,
& never get stopped

If your questioned your just looking for the parts dept & leave

Feb 01, 2013 | Cars & Trucks

1 Answer

I need the radio code for a 2005 kia sedona


Unfortunately, that's something you'll most likely have to call the dealer about. I had a GM that had the same problem and the dealer wanted $80 just to look into their records to retrieve the code. Needless to say I bought an aftermarket radio for about $20 more.
Check your Owner's Manual book first. Sometimes the code will be printed somewhere on the inside of the front/back page or in the section that covers the code system itself. If nothing else, the manual may instruct you how to reset the system for just this situation.

Aug 03, 2012 | 2005 Kia Sedona

1 Answer

How can i replace 1991 maxima radio system?


The original radio is a BOSE system and it has a buit in amp. So if you replaced the deck you need to replace the speakers all so. Don't cut the wires to hook-up the deck buy an addapter KIT. It's not just the stereo that runs though that harness the factory alarm does all so and that will cause you problems. Anyway back to the stereo you need to add an amplifier and problem sovled.

Jul 23, 2012 | 1991 Nissan Maxima

1 Answer

Should i have any spare wires when hooking up an after market car stereo


Yes, It's a very good possibility that you will have a few wires left over. Normally a wire for an aftermarket amp to be triggered on when you turn your radio on and possibly a power antenna or a dimming function that dims your radio lights when your headlights are on. It of course always depends on if you have a power antenna or not, or if you have an aftermarket amp or not or if you have the dimming feature on your car or not. These wires don't apply to everyone.
You will just match the colors between the wiring harness that came with the DUAL radio and the interface adapter that goes to your car. Make sure you use **** style crimp connectors. If not the wires could come loose or cause a popping noise or cause the radio to turn off while driving.
Other than that, installing an aftermarket radio is mostly matching the colors up between the two harnesses and crimping the wires together.3_6_2012_2_31_36_am.jpg

Mar 06, 2012 | Cars & Trucks

1 Answer

2007 honda pilot radio code


Typically to get the code you have to have the serial number of the unit and call a Honda dealership to get the code. Sometimes in years gone by, there was a credit card sized card that had a sticker with the serial number and code. Sometimes the sticker is even stuck on the owners manual or the inside of the glovebox.

It sound like you are going aftermarket so I would think that the code is not needed as the code was only for the factory radio itself, not the rest of the system (speakers, etc..) Call the radio installer and ask but I don't think you need the code.

Nov 27, 2011 | Honda Cars & Trucks

2 Answers

How to connect aftermarket radio into 2002 toyota camry JBL radio (the standart wiring doesn't work).Thanks


Your aftermarket radio should have color-coded wires which identifies power, ground, speakers, etc. most depaetment stores carry a radio harness adapter kit. This will connect to your radio's exact color coded wires, and will plug right in to your factory's wiring plug. And don't forget electrical tape.

Aug 28, 2011 | 2006 Toyota Camry

1 Answer

2004 Pontiac Montana, when I open my drivers door the radio doesn't always shut off any more, I opened the passenger door & it shuts off, I think it's a door pin switch but I don't see a...


You don't find much with the door jamb switches any longer. Its all done inside the door with the switches being on the door latch.
the radio should still be able to be turned off manualy ;)

Aug 24, 2011 | 2004 Pontiac Montana

1 Answer

I changed the battery in my 1997 Discovery and the radio needs to be reset. The local dealer gave me a 7 digit code, but they don't know the procedure for entering it. Any ideas?


So if you were to pay a dealer for their time & have it
taken into the service bay, not a single tech could put
in a radio code
That is pure non sense

Sorry, I had to say something & I don't have your owners
manual or any other material to help you

Try asking another dealer, or see if you can have it
done with a scan tool at a local repair shop

Aug 06, 2011 | 1997 Land Rover Discovery

1 Answer

Hi, I have a 98' chrysler town & country and need help programming the garage opener inside the van. could anyone help me find instructions on how to do that? thank you


A lot of this depends on your OPENER. Typically, current openers use rolling code technology.... The process is to "invite" from the opener... Get a ladder and a light, read the directions on the opener, usually you press a button for a short duration, THEN press the button on the remote sender....

May 28, 2011 | 2000 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...