Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
bring the piston no 1 on the top position check the cam shaft si moving freelyon the outer side of the shaft there are 2 gear with 14mm bolts and 1 extra whole, put a long bolt in the empty space and try to turnthe engine the bolt will go further in the space than the timming is set put the chain on that should do
Posted on Feb 08, 2009
SOURCE: Replace timing belt on Volvo S60
There is no room for error...... Zero clearance. If off one tooth it can and will bend valves. if you are one that just feels the need to get alittle dirty or just can't pay for the service, then get out your Haynes out and turn to .....Tune up, and look at replacing timming belt. Get a cam gear tool that locks them into place so as that they will not move when u have them lined up. make sure they are lined up with marks as said in book. then make sure crank as well as all marks are lined up acordingly. make sure belt marks are lined up with everything. i would reccomend using a volvo belt though cause it will have all the marks on it.However other company's make good quality belts also at a fraction of the price. So it is really up to you.
Good thing when doing timming belt is to also change out your timming belt tensioner. YES do this it will save you a engine in the long run. it is a moving part that will go bad, it will freeze up and snap timming belt. rip out teeth in thebelt and bend valves. So as a gen rule...When you change timming belt, Change belt tensioner at same time since you cant just change tensioner without changing or getting timming belt off. Remember to use your HAYNES. It is your friend and will save you money in the long run. Good luck... Hope this helps you.
Posted on Apr 08, 2009
SOURCE: volvo s60 idle sensor
if you could get your hands on a scanner to read some live data it would help your plight,there is a cam position sensor when you take of the the plastic head cover at the timing belt end,did you check plugs,it also might help to clean the maf with some contact spray,sounds like plugs
Posted on May 27, 2009
Tips for a great answer:
Jul 26, 2017 | Volvo Cars & Trucks
Mar 11, 2015 | 2002 Volvo S60
Jul 21, 2014 | 2004 Volvo S60
Apr 25, 2014 | 2001 Volvo S60
Oct 12, 2012 | 2001 Volvo S60
Oct 03, 2009 | 2004 Volvo S60
Aug 16, 2009 | 2002 Volvo S60
Mar 26, 2009 | 2001 Volvo S60
Oct 05, 2008 | 1992 Volvo 960
Dec 12, 2017 | Audi Cars & Trucks
58 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: