Question about Chevrolet Lumina

1 Answer

What would be hanging down under the car on the drivers side?

On the drivers side, under the car there's metal springs and it also has a round oval connected to it, I am unsure what it is. However it is hanging almost to the ground and I know that it shouldn't be.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Chevrolet Master
  • 12,223 Answers

See the diagram attached. God bless you
What would be hanging down under the car on the dr - f5930385-d362-4f17-9d72-8177560b7f98.jpeg

Posted on Jul 27, 2013

Testimonial: "Thank you for your help, I will be going outside and looking again just to make sure that this is exactly it. But I thank you, a lot!"


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 217 Answers

SOURCE: a black pipe disconnected from somewhere

it may be the sway bar and the bushing mount and bracket is what you need

Posted on Jan 17, 2009

  • 566 Answers

SOURCE: 2004 VW Passat engine cover under car hanging

dead right it is ! the cover has not been resecured properly after changing oil +filter if garage says it waslike this on service why not tell you ?? either way take it back and complain this cover is secured by screws and no excuse for not fitting securely

Posted on May 02, 2009

  • 89 Answers

SOURCE: sheet of metal hanging down form undercarriage

If you are referring to the front of the car there is a splash pan, designed to keep road spray out of the engine compartment.
and sometimes service people think it was engineered
with two many screws,or they vibrated out.
just replace screws.

if this is not the front of the car please re-post question with more information
hope this helped

Posted on Nov 18, 2009

  • 1170 Answers

SOURCE: Hello,

Here is an online guide that will help you :

Posted on May 31, 2010

  • 136 Answers

SOURCE: Grinding/metal dragging on ground noise only when

does the noise go away as you brake? if so your brakes need replacing either pads or discs, if you look at the discs and they seem scored or glazed then the pads are worn to bare metal and discs may need machining as well as new pads.

Posted on Jun 22, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Having trouble opening the hood on 99 monte carlo

Have someone pull on the release, while you press down on the hood

Once open --do not close it--until you wash down or spray solvent
on all latch parts & then lightly lube moving parts

Under the hood is a round part with a spring

All that has to be cleaned as well & you lube the part under the

Aug 12, 2014 | 1999 Chevrolet Monte Carlo

2 Answers

Clunk from front of land rover discovery but only occassionally

have the vehicle put on a 2 post hoist that allows the suspension to drop right down
then carefully check the rubber insulators on the lower arms for splits or indications that the rubber is tearing from the metal bushes

Sep 09, 2017 | 1995 Land Rover Discovery

1 Answer

Metal bar under front tires of 2006 Kia Sedona disattached from sockets

Its probably the stabilizer bar or part of it.
You can go to the auto parts online stores and look up suspension parts for your make and model to see photos of the parts.

Aug 21, 2012 | 2006 Kia Sedona

2 Answers

Seat broken

its old. get a new switch assy and change it out

Sep 01, 2017 | 2005 Lincoln Navigator

1 Answer

Gear shift cable 2005 chevrolet cavalier

Had the same problem. to shift gear manually with your hands. Look under the brake fluid (about a foot down) and there is a flat piece of metal. On the end of it on the bottom is a little rod with a round end. That is where the shift cable connects. pushing it toward the driver side of the car will put it in park. And if you count the number of clicks from park you can change gears. For example: 1 click from park is Reverse, 2 clicks is Neutral, 3 clicks is Drive. That is if it is all the way towards the driver side. Don't force it. when it stops clicking dont push it anymore. Hope this helps.

Jan 20, 2012 | 2005 Chevrolet Cavalier

1 Answer

I have a 98 Jeep Grand Cherokee Laredo and it doesn't go past 1st gear. I don't think that the ****** is gone but there is a hose hanging down now and I am wondering it that is a vacuum hose that...

it may go to the modulator valve on the drivers side of the transmission,if so,,,jack the truck up,use jack stands,,reach up to the hose and connect it to a round shaped cylinder on the drivers side transmission. hard to explain but look at the transmission from underside,towards the front of transmission see a round cylinder with a vacum line missing,thats where the hose will go.then it will shift properly. thank you for choosing

Sep 17, 2011 | 1998 Jeep Cherokee

1 Answer

Inside the cab of my f150 2008 on the right side ( passenger ) I have got a 3 x 3 square ribbed electrical component of some type hanging down. The bolt came loose and it is hanging freely. It is...

Sounds like either an amp module for some of the electrical accessories, or a relay- both of which are designed to handle electrical loads. The amp modules are more noticeable as they are somewhat finned, or ribbed like you said to displace heat efficiently. If its metal, wait until it cools then reattach. There should be a metal framing under the dashboard where it should attach with self tapping bolts.

Sep 14, 2011 | 2008 Ford F-150

2 Answers

Where is the fuel pump relay 1990 subaru loyale?

Mine was under the steering column but on top of the brain. It is silver metallic and round. Another relay was on the bracket next to it.

Jul 10, 2011 | 1990 Subaru Loyale

1 Answer

Trying to locate flasher for turn signals for 1997 cutless supreme

Your FLASHER will be under the dash on driver side running vertically along the drivers door post. It's Round, Silver 1.5"Dia.x1.5"High & has 2-Prong. You may need a small(Flat Slotted) screw-driver to help pry off if you can't pull off by hand.


Apr 17, 2011 | 1997 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides