Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are four o2 sensors on this truck. one on each side just below the exhaust manifold, and one on each side behind the second catalytic converters. (just about even with the back of the front doors.
Posted on Jun 18, 2008
That sensor is the one between the exhaust manifold and the catalytic converter (sensor #1). Bank 2 is the side of the engine that cylinder #1 is NOT on. Here is a diagram showing cylinder #1.
FYI, sensor #2 is the one behind (downstream) the catalytic converter.
Posted on Mar 25, 2009
SOURCE: cooling fan switch/or sensor
The Coolant temp Sensor is located right under the top radiator hose (on the engine side), with a little black connector!, You might have to remove th etop hose to get to it with a deep socket and extension!.
Also Dont Forget to blled the coolant system by the bleeder valve uptop right near/above the coolant sensor!.(10MM Mini socket w/ extension IIRC!)
Posted on Sep 28, 2009
In your Model :-
The automotive thermostat is a temperature controlled on and off valve. When the temperature rises to a predetermined temperature, the thermostat opens up to allow the engine coolant to flow through the cylinder block and the radiator. This flow is crucial to maintain optimum operating temperature for fuel efficiency, enhanced driveability, and engine protection. The coolant flow is reduced when the engine is cold, and the flow is increased when the engine is hot. Contrary to popular opinion, operating the vehicle without the thermostat doesn't make the engine run cooler. It will actually run hotter because there isn't a thermostat to slow the coolant flow. This means the coolant doesn't stay in the radiator long enough to dissipate its heat.
TO TEST THERMOSTAT
There are several ways to test the opening temperature of a thermostat.
One method does not require that the thermostat be removed from the engine.
Positioning a thermostat into an engine.
TO REPLACE THERMOSTAT
If the radiator is filled to the top with coolant and the engine is run without the radiator cap in place, the coolant will expand and spill over as the engine warms up.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Posted on Oct 07, 2009
SOURCE: fuel filter Chrysler 300 crd ?
The question was for a 300 CRD (assuming the "D" is meaning diesel). In which case this is located directly on top of the engine, under the plastic cover right in the middle.
It's a standard service item to be replaced at ever service. Provided you have enough patience to get the 2 pipe clips back on securely the whole job takes about 20 minutes to do.
Posted on Feb 08, 2010
Tips for a great answer:
Feb 25, 2015 | 2009 Chrysler 300
Oct 14, 2011 | 2005 Chrysler 300
Apr 06, 2010 | 2005 Chrysler Crossfire
Mar 30, 2010 | 1985 Volkswagen agon
Mar 17, 2009 | 1991 Peugeot 405
Nov 15, 2008 | 2005 Chrysler 300
33 people viewed this question
Usually answered in minutes!