Question about Cars & Trucks

Open Question

What is the inside of the harmonic balancer called?

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: harmonic balancer

Is the pully on correct?

Posted on Dec 01, 2009

  • 599 Answers

SOURCE: no treads on harmonic balancer

the pulley on the crankshaft should have grooves in it for the belt, otherwise the belt will not turn. is the pulley broken off, get back to me. there are NO technical servise bulletins on this item,if you need more help get back to me, Thanks Ray

Posted on Dec 11, 2009

t_bone22565
  • 1 Answer

SOURCE: torque spec for 1RZ harmonic balancer

how can i set a toyota 1rz engine on timing

Posted on Dec 29, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the crank pulley dampered?


No, you do not want to replace the crank pulley with a solid one. The hub is also know as a Harmonic Balancer. The explosions that happen inside of your engine cause vibrations or harmonics, the balancer greatly reduces these vibrations. Without the ruber insulating ring the harmonics can cause part failure at certain frequencies.

May 28, 2015 | 2006 Mahindra Scorpio 2.6

2 Answers

Had my Harmonic Balancer replace now it shuts off after 10 mins of it being on


the garage may have did something to the crank position sensor that is located behind the harmonic balance. there is a ring gear there to for the timing

Oct 30, 2012 | 2001 Pontiac Grand Prix

1 Answer

I need the location of the harmonic balancer on my 2.2l Ecotec engine. Car is 2004 Chevrolet Cavalier LS.


CRANKSHAFT PULLEY IS THE HARMONIC BALANCER.YOU NEED THESE TOOLS TO REMOVE HARMONIC BALANCER, YOU NEED HARMONIC BALANCER REMOVER AND INSTALLER TOOL.YOU NEED A LARGE PIN SPANNER WRENCH TO HOLD HARMONIC BALANCER IN PLACE WHILE LOOSEN THE HARMONIC BALANCER BOLT.

May 21, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

How do i remove harmonic balancer & replace


YOU NEED A HARMONIC BALANCER PULLER TOOL AND A 15M SIX POINT SOCKET TO REMOVE HARMONIC BALANCER BOLT.TURN OFF RADIO AND REMOVE THE DRIVE BELT AND REMOVE THE NEGATIVE BATTERY CABLE. REMOVE THE STARTER SO YOU CAN PUT A LARGE SCREW DRIVER OR LARGE PUNCH TO STICK IN ONE OF THE FLY WHEEL HOLES TO KEEP ENGINE FROM TURNING WHEN YOU LOOSEN THE HARMONIC BALANCE BOLT. ALSO SCREW DRIVER AND PUNCH CAN KEEP ENGINE FROM TURNING WHEN REMOVER THE HARMONIC BALANCER. YOU WILL NEED A HELPER TO HOLD PUNCH OR SCREW DRIVER WHILE YOU LOOSEN THE BOLT. YOU CAN GO TO SEARS OR ANY AUTO PARTS STORE AND BUY HARMONIC BALANCER PULLER.TORQUE HARMONIC BALANCER BOLT TO 76 FT LBS.

Apr 23, 2011 | 2003 Pontiac Montana

1 Answer

Pully is seperating from crankshaft


Sounds like a failed harmonic balancer. This pulley should have rubber between the outer surface and the center hub. If it does it's called a harmonic balancer and you can call your local parts supplier for price and availability...Hope this helps

Mar 15, 2011 | Oldsmobile Alero Cars & Trucks

3 Answers

How do you remove the harmonic balancer on a 1987 GMC R3500 with a 454?


You remove the giant bolt, then you use a harmonic balancer puller, which essentially bolts up rather than using claws to grab. The bolts of the puller go into the pulley fastening bolt holes.

Something must happen to protect the crank threads, a spacer, using the retainer bolt, or whatever, just do not kill the threads.

Feb 25, 2011 | 1987 GMC R3500

2 Answers

I changed the harmonic balancer and now it is terribly out of time. Didn't touch any timing belts, distributor or the like. Any advice?


There may be a magnet on the harmonic balancer for the crankshaft sensor,

The cam and crank sensor call for spark to the plugs..

Some cars you need a Harmonic Balancer Installer Adapter,
to make sure everything is lined up and gaped..

Check the crankshaft sensor for damage from inproper install, also check the wires going to sensor,, some times the harmonic balancer are such a Pain!! to come off the sensor or wires get damage in the battle.






Nov 30, 2009 | 1995 Geo Prizm

2 Answers

BAD HARMONIC BALANCER


this site is lame ,i just called a dealership and got the answers i needed,i got no help here

Nov 25, 2008 | 1998 Nissan Pathfinder

1 Answer

Timing cover replacement


A standard harmonic balancer puller will work. Remove the balancer bolt which is 15/16. Be sure that the large washer comes off as well. If you don't see the washer when you remove the balancer bolt, use a curved pick or something to remove it from the inside of the balancer. Then you can get the timing cover off.

Aug 07, 2008 | 1989 Lincoln Town Car

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...