Mitsubishi 4g92 wiring diagram - Cars & Trucks

no year car told and is the 2nd question buy the service manual.
country, year, model and engine
Mitsubishi engine
buy it best ,chapter 9 is head

https://procarmanuals.com/mitsubishi-4g9-4g92-4g93-4g94-series-engine-repair-manual/

free view page 20 there shows it is 20 nM _90deg, + 90degl.

You need to get the vehicle to a good mechanic as soon as possible. Is this happening when the engine is hot or cold? Is this a high mileage car?
Smoke could be a number of things. It could be a sticky intake valve that isn't closing correctly causing the exhaust gases to 'burp' backwards through the air intake system. A good mechanic will be able to work out exactly what is happening and suggest a fix for the problem.

fixya doesnt sell products --try dealer --junkyard --online search

Have you changed spark plugs and cables lately ?
It is a possible cause

Hi Omar Hussin,



4g93I have no clue what a 4g92 is... (pretty sure it runs on gas)...
Make, model... 1992 (perhaps?)...
Fuel injected perhaps...
(Most manufacturers suggest NOT running out of gas
(damage can occur = a clue)...

I fancy myself a II
If you are open to suggestion... Repost.

Help fixya VOLUTEERS help you.
Help fixya volunteers help you... rather than wasting a lot of time looking up Mitsubishi Mirage (??) codes... pretty please.


http://www.shopathome.com/discounts_and_coupons/default-brand.aspx?refer=1067731&src=GPSBAF&vendor=google&Distribution=Search&keyword=rock%20auto%20car%20parts&MatchType=b&AdId=92892971185&placement=&device=c&k_clickid=5e420c46-0713-4b53-a2bd-09fe6c71a048&gclid=CLPgreKy0M4CFQqpaQodsnMJ_Q

Could be something different, but. Try turning the key on and off 3 or 4 times before starting it. If it starts right up, the check valve is bad on the fuel pump. It can't be replaced with out the pump unit.

No such adjustment

ANY Slipping requires removing the trans
& rebuilding it

Get computer and engine wire harness

start with the security system, check the owners manual on how to reset, ussually you can turn the ignition on for 10 minutes then off then start the engine. sometimes you have to do this three times. hope thar works for you