Question about Cars & Trucks

1 Answer

I have a 2004 pontiac sunfire, door was hard to open, so I pushed it, now the outer door panel is coming off an I think some clips are broken

Posted by on

1 Answer

You mean inner door panel
The clips are avail on the internet,some in auto parts
stores & mostly at auto body supply wholesalers
But only in a box of 10 pc's

Posted on Jul 27, 2013

3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: drivers side electric window

if the motor is bad and its not a problem in the wiring, you are gonna have to remove the motor and pull or push the window up by hand, then you need to support the window to keep it from falling down. if the motor bolts in you can bolt it back in to keep it up. if not you can sometimes use a heavy duty zip tie around the track arms to hold it up. i would not recommend the duct tape i see a lot of people use. but thats your call. hope this was helpful.

Posted on Mar 21, 2009

  • 232 Answers

SOURCE: need to change door speaker, cant get the door paneling off nor the manual window roller upper off.

Take a flat screwdriver or other similar flat tool,gently pry between the window handle and door panel,you should just be able to see the clip that holds it on to the metal shaft of the window gear,you'll need a pair of needle nose pliers or a flat screwdriver to pull it off,to put it back on you put it on the widow handle and just pop it on the metal shaft.Hope this helps.

Posted on May 09, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Were & what number is the fuse for a 2000 sunfire

The fuses are located just inside the door frame on the driver side. Open the door and look at the side of the dash. That cover comes off and there is the fuse panel.

May 19, 2015 | 2000 Pontiac Sunfire

1 Answer

1998 Pontiac Sunfire. The Fuel Filter needs to be changed.It looks to be the original one, the fuel filter quick release clip is broken.The line will not come loose.What do I do?

if the black circular connector is what has broken,theres not much you can do but replace the
f/line.if its only parcially broke you can try pushing line towards filter,lightly squeesing,then
pulling may find a repair kit for splicing in a end connector.i seen this happen before
& most require a new line

good luck

Jun 22, 2011 | 1998 Pontiac Sunfire

2 Answers

How do you fix the door handel when it wont open from the ouside

the outer handle is connected to the lock with a steel rod. If the outer handle has broken or the clip that holds the rod onto that handle has broken, then thats what you need to replace. You will need to remove the inside door trim to access the locks and rods. Remove the door trim as best you can if you are unable to open the door at all and reach into the door to access the inner door lock rod. Pulling or pushing the rod should allow you to open the door and remove the trim completely.
If there is no obvious damage to the outer door lock, check where the outer door handle rod connects to the lock itself as the clips holding the rods in place can fail. If the clips have failed, replace them with new clips from the vehicle manufacturer..

Mar 10, 2011 | 1992 Buick Regal

1 Answer

How do you remove the door panel from a 2 door Pontiac sunfire , I want to spray sillicone on the locking mechanism , the least bit of frost and the both doors are really hard to unlock . I put the...

I would go to do a search and watch a few folks pull GM door panels out. Search for door panels or speaker replacement. Yours will be just about like them. You will need to go to a parts store and get the special tool which goes under the panel and pulls out the push in snap connectors without breaking them or tearing the door panel. Kind of like a long curved flat blade screwdriver which has a split in the end. Would not hurt to buy some replacement connectors while you are there as some will break.

Nov 14, 2010 | 2004 Pontiac Sunfire

2 Answers

I am trying to remove front door panels on a 2001 pontiac sunfire. i can nort remove window crank to pull panel off

Try pushing panel in to see if there is a clip holding crank on . If so that clip needs to come off.

Sep 19, 2010 | 2001 Pontiac Sunfire

2 Answers

How do i remove the interrior door panel on a pontiac sunfire

if its a standard clip type window crank what you do is get a shop towel or cut up an old t shirt. take the rag and slide it between the door panel and crank. then rotate the rag around the crank it will grab the clip easily and disenguage it. watch it though the clip may fly out and you will loose it. then just pull off reinstall the crank put the clip on the crank and just push it back on the shaft

Apr 11, 2010 | 1998 Pontiac Sunfire

1 Answer

Remove driver's-side mirror on 2003 Pontiac Bonneville

Remove the small triangle panel in the corner of the window, one clip. then to remove all of the door panel you can pry starting at the bottom and work to the sides. once all push clips are off. (they really sound bad when they come loose, but that is normal.) push the panel up to remove the last two holders behind the door handle. You will have to remove these later with a needle nose pliers and slide them back on the door panel before you reinstall. remove elect from block and remove the Three screws holding the mirror. they are 10MM I think. and the mirror will practicly fall our. Or just hit something with it like my wife does and they come off pritty easy.

Mar 03, 2010 | 2003 Pontiac Bonneville

1 Answer

Broken car door latch

remove the inside door panel,there's an access opening for removing two nuts that hold the handle on.

Jan 15, 2010 | Pontiac Sunfire Cars & Trucks

2 Answers

How do i remove the interior window handle in a 1996 pontiac sunfire? (two door coupe) the handle seems to be pressure fit on the as there are no visible snap or c rings.

Press the panel in close to the handle and you will see a c clip inserted in the shaft of the handle.Use a snap ring pliers to pull the clip out.

Sep 16, 2009 | 1996 Pontiac Sunfire

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides